Six Conductors

Mercotac 630

Model 630 Six Conductors, 2@4amps, 4@30amps Disconnects included (4 sm., 8 lg.) Boot Kit available Available with stainless steel ball bearing (630-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

630

0-250

2@4/4@30

100

<1m

300

140 (60) /-20(-29)

700

>25M

630-SS

0-250

2@4/4@30

100

<1m

300

140 (60) /-20(-29)

700

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 630 Accessories


55110 22 - 18 AWG (qty. 4 included)	55253 Shrink Tube (qty. 4 included)		55252 Terminal 16 - 14 AWG (qty. 4 included)

55251 Terminal 16 - 14 AWG (qty. 4 included)		57630 Boot Kit for dust and splash protection IP51

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

Model 630 Standard Wire Connections

Model 630 Wire Connections With Optional Boot Kit

Model 630 Suggested Mounting Methods

Model 630 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
630, et al		1.575" (40.00)	.80" (20)

Typical Bushing Mount Hole Dimensions
630, et al		.875" (22.23)	.40" (10)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)