Fiber Optic Sensors

Model: FS-N41P

Order No: FS-N41P

SKU: 10000009204901

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.07kg

FS-N41P

ModelFS-N41NTypeCableOutputNPNMain unit/expansion unitMain unitResponse time23 µs (S-HSPD*1) /50 µs (HSPD*2) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)Number of control outputs1Number of external inputs―Light source LEDTransmitter side: Red, four-element LED (wavelength: 660 nm)Control outputOpen-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit)Residual voltage: 1.4 V or less (output current: 10 mA or less) /2 V or less (output current: 10 to 100 mA)External inputInput time: 2 ms (ON) /20 ms (OFF) or longer*3Unit expansionUp to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units.Protection circuitProtection against reverse power connection, output overcurrent, output surge, and reverse output connectionMutual interference preventionS-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)Power supplyPower voltage10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS*4Power consumptionDuring normal operation: 870 mW or less (34 mA or less at 24 V/62 mA or less at 12 V)ECO ON: 800 mW or less (31 mA or less at 24 V/56 mA or less at 12 V)ECO FULL: 710 mW or less (28 mA or less at 24 V/49 mA or less at 12 V)*5Environmental resistanceAmbient lightIncandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or lessAmbient temperature-20 °C -4 °F to +55 °C +131 °F (no freezing)*6Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axesShock resistance500 m/s2; 3 times each for X, Y, and Z axesCase materialMain unit and cover: polycarbonateWeightApprox. 78 g*1 Restrictions when S-HSPD is selectedArea detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode.Output timer, Limit Detection, and Display Gain cannot be used.FULL cannot be selected for the ECO function.*2 Restrictions when HSPD is selectedDisplay Gain cannot be used.*3 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected.*4 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher.*5 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max.*6 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F.When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units.The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface.Exercise special care when installing the product in an airtight space.

Model: FS-N41N

Order No: FS-N41N

SKU: 10000008551501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FS-N41N

ModelFS-N41C*1TypeM8 Connector*2Main unit/expansion unitMain unitResponse time23 µs (S-HSPD*3) /50 µs (HSPD*4) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)Number of control outputs2*5Number of external inputs1*5Light source LEDTransmitter side: Red, four-element LED (wavelength: 660 nm)Control outputOpen-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit)Residual voltageNPN 1.4 V or less (output current: 10 mA or less) /2 V or less (output current: 10 to 100 mA)PNP 1.6 V or less (output current: 10 mA or less) /2.2 V or less (output current: 10 to 100 mA)External inputInput time: 2 ms (ON) /20 ms (OFF) or longer*6Protection circuitProtection against reverse power connection, output overcurrent, output surge, and reverse output connectionMutual interference preventionS-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)Power supplyPower voltage10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS*7Power consumptionDuring normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V)ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V)ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)*8Environmental resistanceAmbient lightIncandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or lessAmbient temperature-20 °C -4 °F to +55 °C +131 °F (no freezing)*9Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axesShock resistance500 m/s2; 3 times each for X, Y, and Z axesCase materialMain unit and cover: polycarbonateWeightApprox. 25 g*1 IO-Link Specifi cation V.1.1/COM2 (38.4 kbps) is supported.*2 Ensure the cable length is 30 m 98.4" or less for the M8 connector type. Ensure the cable length is 20 meters 65.6' or less when connecting by way of IO-Link.*3 Restrictions when S-HSPD is selectedOutput 2 of dual output types is fixed to OFF.IO-Link communication cannot be used.Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode.Output timer, Limit Detection, and Display Gain cannot be used.FULL cannot be selected for the ECO function.*4 Restrictions when HSPD is selectedDisplay Gain cannot be used.*5 Output 2 and the external input are selectable.*6 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected.*7 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher.*8 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max.*9 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F.When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units.The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface.Exercise special care when installing the product in an airtight space.

Model: FS-N41C

Order No: FS-N41C

SKU: 10000006714101

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FS-N41C

ModelFS-N40TypeZero Line TypeMain unit/expansion unitExpansion unitResponse time23 µs (S-HSPD*1) /50 µs (HSPD*2) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)Number of control outputsNone*3Light source LEDTransmitter side: Red, four-element LED (wavelength: 660 nm)External inputInput time: 2 ms (ON) /20 ms (OFF) or longer*4Unit expansionUp to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units.Protection circuitProtection against reverse power connection, output overcurrent, output surge, and reverse output connectionMutual interference preventionS-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)Power supplyPower voltage10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS*5Power consumptionDuring normal operation: 870 mW or less (34 mA or less at 24 V/62 mA or less at 12 V)ECO ON: 800 mW or less (31 mA or less at 24 V/56 mA or less at 12 V)ECO FULL: 710 mW or less (28 mA or less at 24 V/49 mA or less at 12 V)*6Environmental resistanceAmbient lightIncandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or lessAmbient temperature-20 °C -4 °F to +55 °C +131 °F (no freezing)*7Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axesShock resistance500 m/s2; 3 times each for X, Y, and Z axesCase materialMain unit and cover: polycarbonateWeightApprox. 23 g*1 Restrictions when S-HSPD is selectedArea detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode.Output timer, Limit Detection, and Display Gain cannot be used.FULL cannot be selected for the ECO function.*2 Restrictions when HSPD is selectedDisplay Gain cannot be used.*3 This counts as 1 output when connecting multiple units to the FS-MC8N/P, NU Series.*4 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected.*5 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher.*6 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max.*7 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F.When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units.The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface.Exercise special care when installing the product in an airtight space.

Model: FS-N40

Order No: FS-N40

SKU: 10000015123301

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.20kg

FS-N40

ModelSR-X300 *1TypeSR-X300: Standard type (2.3 megapixels)SR-X300 + SR-XHR: High-resolution typeReceiverSensorCMOS image sensorNumber of pixels1920 × 1200FocusAuto*2EmitterIllumination light sourceHigh-intensity red/white LED*3Pointer light sourceHigh-intensity green LED*3Reading specificationsSupported symbols2D codesQR, MicroQR, DataMatrix(ECC200), DMRE, GS1 DataMatrix, PDF417, MicroPDF417,GS1 Composite (CC-A/CC-B/CC-C), DotCode, Maxi Code, Aztec CodeBarcodesCODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93,JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal (Japan Postal, IMB)Minimum resolution2D codesSR-X300: 0.024 mm 0.0009"SR-X300 + SR-XHR: 0.010 mm 0.0004"Barcodes0.082 mm 0.0032"Reading distanceSR-X300: 70 to 1000 mm 2.76" to 39.37"SR-X300 + SR-XHR: 32 to 47 mm 1.26" to 1.85"Reading field of viewSR-X300: 104 × 65 mm 4.09" × 2.56"(at a distance of 300 mm 11.81")SR-X300 + SR-XHR: 12.3 × 7.7 mm 0.48" × 0.30"(at a distance of 47 mm 1.85")I/O specificationsControl inputNumber of inputs2Input typeBidirectional voltage inputMaximum rating30 VDCMinimum ON voltage15 VDCMaximum OFF current0.2 mAControl outputNumber of outputs3Output typePhoto MOS relay outputMaximum rating30 VDCMaximum load current50 mA or less for 1 output, or 100 mA or less in total for 3 outputsLeakage current when OFF0.1 mA or lessResidual voltage when ON1 V or lessEthernetCommunication standardIEEE 802.3-compliant 100BASE-TXSupported protocolsTCP/IP, SNTP, FTP, SFTP, HTTP, HTTPS, BOOTP, EtherNet/IP®, PROFINET, KV STUDIO, MC protocol, OMRON PLC linkSerial communicationCommunication standardRS-232C-compliantCommunication speed600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bpsSupported protocolsNo-protocol, KV STUDIO, MC protocol, SYSWAYUSBCommunication standardUSB 2.0 High Speed compliantRatingsPower voltage24 VDC +25%/-20%Current consumptionApprox. 750 mAEnvironmental resistanceEnclosure ratingIP65/IP67 (IEC60529)*4Ambient temperature0 to +45°C 32 to 113°FStorage temperature-10 to +50°C 14 to 122°FRelative humidity35 to 85% RH (No condensation)Storage relative humidityWeightSR-X300: Approx. 200 g 7.06 ozSR-X300 + SR-XHR: Approx. 225 g 7.94 oz*1 System ROM rewrites: 100000*2 The focal position can be adjusted automatically during installation or tuning.*3 LEDs and lamps are classified as shown below according to IEC 62471 (JIS C 7550).• Exempt group: Objects that do not cause any photobiological damage.• Risk group 1 (low risk): Objects that do not cause damage that makes constraints on normal actions necessary.• Risk group 2 (moderate risk): Objects that do not cause damage accompanied by unpleasant feelings and thermal discomfort.• Risk group 3 (high risk): Objects that cause damage even due to temporary or short-term exposure.The risk groups for this product are listed below.Pointer light source (Green): Risk group 1Illumination light source (Red): Risk group 1Illumination light source (White), Advance only: Risk group 1*4 Attach a USB port cover to meet the protective structural specification.

Model: FS-V34P

Order No: FS-V34P

SKU: 10000069048501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.07kg

FS-V34P

ModelFS-V34CPType2-output withM8 connectorOutputPNPMain unit/Expansion unitExpansion unitControl output2 outputsMonitor output (1 to 5 V)N/AExternal inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputPNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,32 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 22 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V34CP

Order No: FS-V34CP

SKU: 10000069048401

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.07kg

FS-V34CP

ModelFS-V34CType2-output withM8 connectorOutputNPNMain unit/Expansion unitExpansion unitControl output2 outputsMonitor output (1 to 5 V)N/AExternal inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 22 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V34C

Order No: FS-V34C

SKU: 10000069048301

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.07kg

FS-V34C

ModelFS-V34Type2-output + 1-input with cableOutputNPNMain unit/Expansion unitExpansion unitControl output2 outputsMonitor output (1 to 5 V)N/AExternal input1 inputConnector―Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 70 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V34

Order No: FS-V34

SKU: 10000069048201

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.08kg

FS-V34

ModelFS-V33PType2-output + 1-input with cableOutputPNPMain unit/Expansion unitMain unitControl output2 outputsMonitor output (1 to 5 V)N/AExternal input1 inputConnector―Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputPNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,32 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 80 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V33P

Order No: FS-V33P

SKU: 10000042186201

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FS-V33P

ModelFS-V33CPType2-output withM8 connectorOutputPNPMain unit/Expansion unitMain unitControl output2 outputsMonitor output (1 to 5 V)N/AExternal inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputPNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,32 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 22 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V33CP

Order No: FS-V33CP

SKU: 10000019966301

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FS-V33CP

ModelFS-V33CType2-output withM8 connectorOutputNPNMain unit/Expansion unitMain unitControl output2 outputsMonitor output (1 to 5 V)N/AExternal inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 22 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V33C

Order No: FS-V33C

SKU: 10000069048101

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.08kg

FS-V33C

ModelFS-V33Type2-output + 1-input with cableOutputNPNMain unit/Expansion unitMain unitControl output2 outputsMonitor output (1 to 5 V)N/AExternal input1 inputConnector―Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)/[Limited light intensity/Count check/Abnormality detection]Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 80 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V33

Order No: FS-V33

SKU: 10000008128401

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.04kg

FS-V33

ModelFS-V32PType1-output with cableOutputPNPMain unit/Expansion unitExpansion unitControl output1 outputMonitor output (1 to 5 V)N/AExternal inputConnector―Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputPNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 45 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V32P

Order No: FS-V32P

SKU: 10000044369201

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.04kg

FS-V32P

ModelFS-V32CPType1-output + 1-inputwith M8 connectorOutputPNPMain unit/Expansion unitExpansion unitControl output1 outputMonitor output (1 to 5 V)N/AExternal input1 inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputPNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 45 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V32CP

Order No: FS-V32CP

SKU: 10000069048001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.04kg

FS-V32CP

ModelFS-V32CType1-output + 1-inputwith M8 connectorOutputNPNMain unit/Expansion unitExpansion unitControl output1 outputMonitor output (1 to 5 V)N/AExternal input1 inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 45 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V32C

Order No: FS-V32C

SKU: 10000069047901

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.04kg

FS-V32C

ModelFS-V32Type1-output with cableOutputNPNMain unit/Expansion unitExpansion unitControl output1 outputMonitor output (1 to 5 V)N/AExternal inputConnector―Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 45 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V32

Order No: FS-V32

SKU: 10000069047801

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.08kg

FS-V32

ModelFS-V31PType1-output with cableOutputPNPMain unit/Expansion unitMain unitControl output1 outputMonitor output (1 to 5 V)N/AExternal inputConnector―Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputPNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 80 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V31P

Order No: FS-V31P

SKU: 10000007831101

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.08kg

FS-V31P

ModelFS-V31MTypeMonitor outputOutputNPNMain unit/Expansion unitMain unitControl output1 outputMonitor output (1 to 5 V)External inputN/ALight source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 80 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V31M

Order No: FS-V31M

SKU: 10000047688501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.08kg

FS-V31M

ModelFS-V31CPType1-output + 1-inputwith M8 connectorOutputPNPMain unit/Expansion unitMain unitControl output1 outputMonitor output (1 to 5 V)N/AExternal input1 inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputPNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 80 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V31CP

Order No: FS-V31CP

SKU: 10000006792001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.08kg

FS-V31CP

ModelFS-V31CType1-output + 1-inputwith M8 connectorOutputNPNMain unit/Expansion unitMain unitControl output1 outputMonitor output (1 to 5 V)N/AExternal input1 inputConnectorM8Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 80 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V31C

Order No: FS-V31C

SKU: 10000069047701

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.08kg

FS-V31C

ModelFS-V31Type1-output with cableOutputNPNMain unit/Expansion unitMain unitControl output1 outputMonitor output (1 to 5 V)N/AExternal inputConnector―Light source LEDRed, 4-element LED (Wavelength: 640 nm)Response time33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)Output selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 80 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V31

Order No: FS-V31

SKU: 10000020729801

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FS-V31

ModelFS-V30Type0-lineOutputNPNMain unit/Expansion unitExpansion unitControl outputN/AMonitor output (1 to 5 V)External inputLight source LEDRed, 4-element LED (Wavelength: 640 nm)Response time193 µs to 16.7 msOutput selectionLIGHT-ON/DARK-ON (switch-selectable)Display indicatorOperation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) andCurrent Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variationsBar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling displaySize30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)Detection modeLight intensity (area detection possible, automatic sensitivity-tracking function provided)Timer functionOFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectableTimer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.Control outputNPN open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.External inputyInput time: 2 ms (ON)/20 ms (OFF) min.*2Unit expansionUp to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.Number of interference prevention unitsNormal operationHIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台RatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessPower consumptionNormal: 710 mW max. (Using 24 V, 29 mA max., using 12 V, 40 mA max.)/Power saving: 540 mW max. (Using 24 V, 22 mA max., using 12 V, 28 mA max.)*3Environmental resistanceAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)*4Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsCase materialPolycarbonateAccessoriesN/AWeightApprox. 25 g*1 Total current of two outputs should be less than 100 mA.*2 Only available on certain models.*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Model: FS-V30

Order No: FS-V30

SKU: 10000069047601

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FS-V30

ModelOP-87380TypeWaterproof Adapter BOverviewUsed when small diameter fiber unit is used with water-proof amplifier FS-N15CN/FS-N15CP.Applicable productFS-N15CN/N15CP + Φ 1.0 fiber unitNumber included1 pcs.NoteThis is included with the FS-N15CN/N15CP water-proof amplifier. Use this product when using the small-diameter (1.0) fiber unit (however, the rating is IP65 not IP66).

Model: OP-73880

Order No: OP-73880

SKU: 10000008549301

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.15kg

OP-73880

ModelOP-5148TypePNP AdapterOverviewAdapter to convert NPN output to PNP output.Applicable productNPN output sensor

Model: OP-5148

Order No: OP-5148

SKU: 10000015199301

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.10kg

OP-5148

ModelOP-23980TypeFittingsOverviewMounting bracket for FS-L50 / FU-10.Applicable productFS-L50 / FU-10 (FU-6F is fixable)Number included2 pcs.

Model: OP-73865

Order No: OP-73865

SKU: 10000019238001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.05kg

OP-73865

ModelOP-73864TypeConnector CableApplicable productFS-N1*C, FS-V30C, PZ-G, M8 connector sensorNumber included1 pcs.Cable endM8 straight - Loose wireLength2 m 6.56'MaterialCable: Polyvinyl chloride (PVC)WeightApprox. 55 g

Model: FU-55

Order No: FU-55

SKU: 10000015736801

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FU-55

ModelFU-54TZ*1Optical axis diameter(Standard target to be detected)ø1 mm0.039"Beam emitting directionFlatFibre unit length2 m78.74" free-cutFibre unit diameterø2.2Minimum bend radiusR2 mm0.079" Tough-FlexMinimum detectable objectObject with a diameter of 0.005 mm0.0002"*2Environmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 25 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-4F

Order No: FU-4F

SKU: 10000009537001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-4F

ModelFU-49X*1Sizeø1.5 mm0.059"Fibre unit length1 m39.37" cannot be cutMinimum bend radiusR4 mm0.157" high-flexMinimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 3 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-48

Order No: FU-48

SKU: 10000010365501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-48

ModelFU-47TZ*1Beam emitting directionSideFibre unit length1 m39.37" free-cutFibre unit diameterø1.0×2Minimum bend radiusR2 mm0.079" Tough-FlexMinimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 4 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-46

Order No: FU-46

SKU: 10000015735601

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-46

ModelFU-45X*1Fibre unit length50 cm19.685" cannot be cutMinimum bend radiusR4 mm0.157"Minimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 4 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-43

Order No: FU-43

SKU: 10000011431401

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FU-43

ModelFU-42TZ*1Beam emitting directionFlatFibre unit length2 m78.74" free-cutFibre unit diameterø2.2×2Minimum bend radiusR2 mm0.079" Tough-FlexMinimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 24 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-40

Order No: FU-40

SKU: 10000008532901

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-40

ModelFU-38V*1Beam emitting directionFlatFibre unit length2 m78.74" free-cutFibre unit diameterø1.0×2Minimum bend radiusR10 mm0.394"Minimum detectable objectCopper wire with a diameter of 0.080.0031"*2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 5 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-38

Order No: FU-38

SKU: 10000008533601

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-38

ModelFU-37*1Beam emitting directionSideFibre unit length2 m78.74" free-cutFibre unit diameterø1.0×2Minimum bend radiusR10 mm0.394"Minimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Repetition accuracy―Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 6 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-37

Order No: FU-37

SKU: 10000011391501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-37

ModelFU-35TZ*1SizeM3Detection arrangementCoaxialFibre unit length1 m39.37" free-cutFibre unit diameterø1.3×2ShapeThreadedMinimum bend radiusR2 mm0.079" Tough-FlexMinimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 7 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-34

Order No: FU-34

SKU: 10000011390901

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.01kg

FU-34

ModelFU-33*1Beam emitting directionSideFibre unit length1 m39.37" free-cutFibre unit diameterø2.2×2Minimum bend radiusR25 mm0.984"Minimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 10 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-33

Order No: FU-33

SKU: 10000011390601

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-33

ModelFU-32*1Optical axis diameter(Standard target to be detected)ø0.6 mm0.024"Beam emitting directionSideFibre unit length1 m39.37" free-cutFibre unit diameterø1.3Minimum bend radiusR25 mm0.984"Minimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 5 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-32

Order No: FU-32

SKU: 10000009538101

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.07kg

FU-32

ModelFU-31*1Beam emitting directionSideFibre unit length2 m78.74" free-cutFibre unit diameterø1.0×2Minimum bend radiusR10 mm0.394"Minimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 5 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-31

Order No: FU-31

SKU: 10000007691801

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.01kg

FU-31

ModelFU-25*1SizeM6Detection arrangementCoaxialFibre unit length2 m78.74" free-cutFibre unit diameterø2.2×2ShapeStraightMinimum bend radiusR25 mm0.984"Minimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 18 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-25

Order No: FU-25

SKU: 10000011390101

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-25

ModelFU-24X*1SizeM3Detection arrangementCoaxialFibre unit length50 cm19.685" cannot be cutShapeStraightMinimum bend radiusR10 mm0.394"Minimum detectable objectGold wire with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 4 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-20

Order No: FU-20

SKU: 10000008566501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-20

ModelFU-18M*1Optical axis diameter(Standard target to be detected)ø1 mm0.039"Beam emitting directionSideAperture angleApprox 3°Fibre unit length2 m78.74" free-cutFibre unit diameterø1.0Minimum bend radiusR10 mm0.394"Minimum detectable objectObject with a diameter of 0.02 mm0.0008"*2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 6 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-18

Order No: FU-18

SKU: 10000008533001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-18

ModelFU-16Z*1Optical axis diameter(Standard target to be detected)ø2.5 mm0.098"Beam emitting directionSideAperture angleApprox 6°Fibre unit length2 m78.74" free-cutFibre unit diameterø1.0Minimum bend radiusR2 mm0.079" Tough-FlexMinimum detectable objectObject with a diameter of 0.1 mm0.004"*2Environmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 8 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-16

Order No: FU-16

SKU: 10000011389001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.01kg

FU-16

ModelFU-15*1Fibre unit length2 m78.74" free-cutFibre unit diameterø1.0×2Minimum bend radiusR10 mm0.394"Environmental resistanceAmbient temperature-20 to +50 °C -4 to 122 °FWeightApprox. 12 g*1 For details on the detecting distance, see the fiber amplifier catalog.

Model: FU-15

Order No: FU-15

SKU: 10000011890801

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-15

ModelFU-13*1Fibre unit length2 m78.74" free-cutFibre unit diameterø1.0×2Minimum bend radiusR2 mm0.079" Tough-FlexEnvironmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 8 g*1 For details on the detecting distance, see the fiber amplifier catalog.

Model: FU-13

Order No: FU-13

SKU: 10000012248901

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.02kg

FU-13

ModelFU-12*1Optical axis diameter(Standard target to be detected)10 × 3 mm0.394" × 0.118"Optical axis width10 mm0.394"Fibre unit length2 m78.74" free-cutFibre unit diameterø2.2Minimum bend radiusR2 mm0.079" Tough-FlexEnvironmental resistanceAmbient temperature-40 to +50 °C -40 to 122 °FWeightApprox. 23 g*1 For details on the detecting distance, see the fiber amplifier catalog.

Model: FU-12

Order No: FU-12

SKU: 10000009538501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.01kg

FU-12

ModelFU-11*1Fibre unit length2 m78.74" free-cutFibre unit diameterø2.2×2Minimum bend radiusR25 mm0.984"Minimum detectable objectMetal wire (parallel) with a diameter of 0.005 mm0.0002" *2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 19 g*1 For details on the detecting distance, see the fiber amplifier catalog.*2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Model: FU-11

Order No: FU-11

SKU: 10000010558401

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

FU-11

ModelFU-10TypeVariable spotFocal distance10 to 30 mm0.394" to 1.181"Fibre unit length2 m78.74" free-cutFibre unit diameterø1.3×2Environmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 5 g

Model: FU-10

Order No: FU-10

SKU: 10000011388501

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.11kg

FU-10

ModelFS-MC8POutputPNPResponse timeDepends on the response time settings of the connected expansion unitsExternal inputInput time of the connected expansion units +11 msNumber of inputs and outputsSeparate control outputs: 8, common output: 1, common input: 1Unit expansionUp to 8 expansion units can be connected. (However, each dual output type will be treated as 2 expansion units.) Allowable passing current: 1200 mA or lessIndicatorsSTATUS indicator (green and red two-color display) MEMORY indicator (orange) LOCK indicator (orange)Separate control output,common outputPNP open-collector, 30 V or less, 20 mA or less per output, residual voltage: 1.6 V or lessProtection circuitProtection against reverse power connection, reverse output connection, output overcurrent, and output surgePower supplyPower voltage10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS*1Power consumption690 mW or less (when used as a solitary unit)  (26 mA or less at 24 V/38 mA or less at 12 V [excluding the load current] )*2Environmental resistanceAmbient temperature-20 °C -4 °F to +55 °C +131 °F (no freezing)Vibration resistance10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axesShock resistance500 m/s2; 3 times each for X, Y, and Z axesCase materialMain unit and cover: polycarbonateWeightApprox. 110 g*1 Match the rated power supply voltage of the expansion units to be connected to the system.*2 The power consumption including the load when the maximum number of units are connected is 38 W max.

Model: F-6HA

Order No: F-6HA

SKU: 10000015744201

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

F-6HA

ModelF-5HATypeSide view, variable spot lensCombinable fiber unitFU-35FZ,FU-35FG,FU-35FASpot diameterø0.5 to 3 mmø0.02" to 0.118"Detection focal distance8 to 30 mm0.315" to 1.181"*1WeightApprox. 2 g*1 When using the FS-N10 Series and FS-V30 Series.

Model: F-5HA

Order No: F-5HA

SKU: 10000015744101

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.01kg

F-5HA

ModelF-5*1TypeSide view with mounting holesCompatible fiberFU-77V/77 ,FU-7F/86A ,FU-86Z ,FU-78 ,FU-77GEnvironmental resistanceAmbient temperature-40 to +105 °C -40 to 221 °FWeightApprox. 10 g*1 For details on the detecting distance, see the fiber amplifier catalog.

Model: F-4HA

Order No: F-4HA

SKU: 10000015744001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

F-4HA

ModelF-4*1TypeUltra long distance, focused beam (aperture angle : Approx 8°)Compatible fiberFU-77TZ/77V/77 ,FU-7F ,FU-78 ,FU-77G/77TGEnvironmental resistanceAmbient temperature-40 to +70 °C -40 to 158 °FWeightApprox. 1 g*1 For details on the detecting distance, see the fiber amplifier catalog.

Model: F-3HA

Order No: F-3HA

SKU: 10000015743901

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.00kg

F-3HA

ModelF-2HATypeSmall beam spot lensCombinable fiber unitFU-24X,FU-21X,FU-35FZ,FU-35FG,FU-35FA,FU-35TZ,FU-35TGSpot diameterApprox 0.1 (FU-24X), Approx 0.2 (FU-21X), Approx 0.4 (FU-35FZ, FU-35FG, FU-35FA, FU-35TZ, FU-35TG)Detection focal distance7 ±2 mm0.276" ±0.079"*1Environmental resistanceAmbient temperature-30 to +70 °C -22 to 158 °FWeightApprox. 1 g*1 When using the FS-N10 Series and FS-V30 Series.