Photoelectric Sensors

Model: LR-TB5000CL

Order No: LR-TB5000CL

SKU: 10000012148001

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，4.00 cm

Weight: 0.16kg

LR-TB5000CL

ModelLR-TB5000CLTypeCable with connector M12Detectable distance60 to 5000 mm 2.36" to 196.85"*1Spot diameterVariable(use a spot diameter of 40 mm 1.57" or less)Light sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1,FDA (CDRH) Part1040.10*2)Mutual interference prevention function4 units (when using the interference prevention function)TimerOFF/OFF delay/ON delay/One-shotResponse time2 ms/20 ms/50 ms/200 ms/2000 msselectableI/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, residual voltage: 2 V or less,N.O./N.C. selectable*3*4Analog outputCurrent output/Voltage output selectableCurrent output: 4 to 20 mA with a max. load resistance of 500 ΩVoltage output: 0 to 10 V with an external load resistance of 5 kΩ or more*3*4Protection circuitProtection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surgePower voltage20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption50 mA or less (without load)*5Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp/Sunlight: 10,0000 lux or lessAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover and buttons: PES,Lens cover and display: PMMA (scratch-resistant coating specifications),Cable bushing: PBT,Cable: PVC,M12 connector: TPE, PBT, Nickel-plated brassAccompanying itemsInstruction manualWeightApprox. 160 g*1 The range for displayable distance is from 50 to 5200.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 You can select the I/O from the following combinations.Control output × 2, control output + external inputControl output + analog output (LR-TB5000/TB5000C/TB5000CL only)External input + analog output (LR-TB5000/TB5000C/TB5000CL only)(For details on the setting method, see the instruction manual.)*4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*5 150 mA or less(with load)

Model: LR-TB2000

Order No: LR-TB2000

SKU: 10000006755901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，4.00 cm

Weight: 0.12kg

LR-TB2000

ModelLR-TB2000TypeCableDetectable distance60 to 2000 mm 2.36" to 78.74"*1Spot diameterApprox. ø4 mm ø0.16"Light sourceTypeRed laser (660 nm)Laser classClass 2 laser product(IEC60825-1,FDA (CDRH) Part1040.10*2)Mutual interference prevention function4 units (when using the interference prevention function)TimerOFF/OFF delay/ON delay/One-shotResponse time1 ms/10 ms/25 ms/100 ms/1000 msselectableI/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, residual voltage: 2 V or less,N.O./N.C. selectable*3*4Analog output-Protection circuitProtection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surgePower voltage20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption45 mA or less (without load)*5Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp/Sunlight: 10,0000 lux or lessAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover and buttons: PES,Lens cover and display: PMMA (scratch-resistant coating specifications),Cable bushing: PBT,Cable: PVCAccompanying itemsInstruction manual,Laser warning and explanation labelsWeightApprox. 125 g (Including cable)*1 The range for displayable distance is from 50 to 2200.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 You can select the I/O from the following combinations.Control output × 2, control output + external inputControl output + analog output (LR-TB5000/TB5000C/TB5000CL only)External input + analog output (LR-TB5000/TB5000C/TB5000CL only)(For details on the setting method, see the instruction manual.)*4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*5 145 mA or less (with load)

Model: LR-TB5000C

Order No: LR-TB5000C

SKU: 10000012723001

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，4.00 cm

Weight: 0.16kg

LR-TB5000C

ModelLR-TB5000CTypeCable with connector M12Detectable distance60 to 5000 mm 2.36" to 196.85"*1Spot diameterVariable(use a spot diameter of 40 mm 1.57" or less)Light sourceTypeRed laser (660 nm)Laser classClass 2 laser product(IEC60825-1,FDA (CDRH) Part1040.10*2)Mutual interference prevention function4 units (when using the interference prevention function)TimerOFF/OFF delay/ON delay/One-shotResponse time1 ms/10 ms/25 ms/100 ms/1000 msselectableI/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, residual voltage: 2 V or less,N.O./N.C. selectable*3*4Analog outputCurrent output/Voltage output selectableCurrent output: 4 to 20 mA with a max. load resistance of 500 ΩVoltage output: 0 to 10 V with an external load resistance of 5 kΩ or more*3*4Protection circuitProtection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surgePower voltage20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption50 mA or less (without load)*5Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp/Sunlight: 10,0000 lux or lessAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover and buttons: PES,Lens cover and display: PMMA (scratch-resistant coating specifications),Cable bushing: PBT,Cable: PVC,M12 connector: TPE, PBT, Nickel-plated brassAccompanying itemsInstruction manual,Laser warning and explanation labelsWeightApprox. 160 g*1 The range for displayable distance is from 50 to 5200.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 You can select the I/O from the following combinations.Control output × 2, control output + external inputControl output + analog output (LR-TB5000/TB5000C/TB5000CL only)External input + analog output (LR-TB5000/TB5000C/TB5000CL only)(For details on the setting method, see the instruction manual.)*4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*5 150 mA or less(with load)

Model: LR-TB2000CL

Order No: LR-TB2000CL

SKU: 10000006756001

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，4.00 cm

Weight: 0.08kg

LR-TB2000CL

ModelLR-TB2000CLTypeCable with connector M12Detectable distance60 to 2000 mm 2.36" to 78.74"*1Spot diameterApprox. ø4 mm ø0.16"Light sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1,FDA (CDRH) Part1040.10*2)Mutual interference prevention function4 units (when using the interference prevention function)TimerOFF/OFF delay/ON delay/One-shotResponse time2 ms/20 ms/50 ms/200 ms/2000 msselectableI/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, residual voltage: 2 V or less,N.O./N.C. selectable*3*4Analog output-Protection circuitProtection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surgePower voltage20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption45 mA or less (without load)*5Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp/Sunlight: 10,0000 lux or lessAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover and buttons: PES,Lens cover and display: PMMA (scratch-resistant coating specifications),Cable bushing: PBT,Cable: PVC,M12 connector: TPE, PBT, Nickel-plated brassAccompanying itemsInstruction manualWeightApprox. 85 g*1 The range for displayable distance is from 50 to 2200.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 You can select the I/O from the following combinations.Control output × 2, control output + external inputControl output + analog output (LR-TB5000/TB5000C/TB5000CL only)External input + analog output (LR-TB5000/TB5000C/TB5000CL only)(For details on the setting method, see the instruction manual.)*4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*5 145 mA or less (with load)

Model: LR-TB5000

Order No: LR-TB5000

SKU: 10000008149901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，4.00 cm

Weight: 0.20kg

LR-TB5000

ModelLR-TB5000TypeCableDetectable distance60 to 5000 mm 2.36" to 196.85"*1Spot diameterVariable(use a spot diameter of 40 mm 1.57" or less)Light sourceTypeRed laser (660 nm)Laser classClass 2 laser product(IEC60825-1,FDA (CDRH) Part1040.10*2)Mutual interference prevention function4 units (when using the interference prevention function)TimerOFF/OFF delay/ON delay/One-shotResponse time1 ms/10 ms/25 ms/100 ms/1000 msselectableI/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, residual voltage: 2 V or less,N.O./N.C. selectable*3*4Analog outputCurrent output/Voltage output selectableCurrent output: 4 to 20 mA with a max. load resistance of 500 ΩVoltage output: 0 to 10 V with an external load resistance of 5 kΩ or more*3*4Protection circuitProtection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surgePower voltage20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption50 mA or less (without load)*5Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp/Sunlight: 10,0000 lux or lessAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover and buttons: PES,Lens cover and display: PMMA (scratch-resistant coating specifications),Cable bushing: PBT,Cable: PVCAccompanying itemsInstruction manual,Laser warning and explanation labelsWeightApprox. 200 g (Including cable)*1 The range for displayable distance is from 50 to 5200.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 You can select the I/O from the following combinations.Control output × 2, control output + external inputControl output + analog output (LR-TB5000/TB5000C/TB5000CL only)External input + analog output (LR-TB5000/TB5000C/TB5000CL only)(For details on the setting method, see the instruction manual.)*4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*5 150 mA or less(with load)

Model: LR-TB2000C

Order No: LR-TB2000C

SKU: 10000016614701

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，4.00 cm

Weight: 0.08kg

LR-TB2000C

ModelLR-TB2000CTypeCable with connector M12Detectable distance60 to 2000 mm 2.36" to 78.74"*1Spot diameterApprox. ø4 mm ø0.16"Light sourceTypeRed laser (660 nm)Laser classClass 2 laser product(IEC60825-1,FDA (CDRH) Part1040.10*2)Mutual interference prevention function4 units (when using the interference prevention function)TimerOFF/OFF delay/ON delay/One-shotResponse time1 ms/10 ms/25 ms/100 ms/1000 msselectableI/OControl outputNPN open collector/PNP open collector selectable30 VDC or less, 50 mA or less, residual voltage: 2 V or less,N.O./N.C. selectable*3*4Analog output-Protection circuitProtection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surgePower voltage20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSCurrent consumption45 mA or less (without load)*5Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp/Sunlight: 10,0000 lux or lessAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: Zinc die cast (Nickel chrome plating),Indicator cover and buttons: PES,Lens cover and display: PMMA (scratch-resistant coating specifications),Cable bushing: PBT,Cable: PVC,M12 connector: TPE, PBT, Nickel-plated brassAccompanying itemsInstruction manual,Laser warning and explanation labelsWeightApprox. 85 g*1 The range for displayable distance is from 50 to 2200.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 You can select the I/O from the following combinations.Control output × 2, control output + external inputControl output + analog output (LR-TB5000/TB5000C/TB5000CL only)External input + analog output (LR-TB5000/TB5000C/TB5000CL only)(For details on the setting method, see the instruction manual.)*4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.*5 145 mA or less (with load)

Model: LR-ZH500P

Order No: LR-ZH500P

SKU: 10000037544201

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.11kg

LR-ZH500P

ModelLR-ZH500P*1TypeU.C.D. FunctionDistance based laser sensorAppearanceRectangularOutputPNPCable connection2 m cableDetectable distance35 to 500 mm 1.38" to 19.69"(465 to 0)*2Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 300 mm 7.09" to 11.81": 25 mm 0.98"300 to 400 mm 11.81" to 15.75": 40 mm 1.57"400 to 500 mm 15.75" to 19.69": 50 mm 1.97"Display resolution1 to 5 (1 to 5 mm 0.04" to 0.20")Spot sizeApprox. ø3 mm ø0.12"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 2 laser product (IEC60825-1)Class II Laser product (FDA(CDRH) Part1040.10)FunctionIndicator3-digit 7-segment display (white),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 10,000 lux or lessSunlight: 20,000 lux or less at 250 mm 9.84"*4Incandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less at 500 mm 19.69"*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual, FDA warning/certification/identification label,Laser warning/explanation labelsWeightApprox. 110 g (Including cable)*1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office.*2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZH500CP

Order No: LR-ZH500CP

SKU: 10000007764701

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZH500CP

ModelLR-ZH500CP*1TypeU.C.D. FunctionDistance based laser sensorAppearanceRectangularOutputPNPCable connectionM8 connector, 4-pinDetectable distance35 to 500 mm 1.38" to 19.69"(465 to 0)*2Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 300 mm 7.09" to 11.81": 25 mm 0.98"300 to 400 mm 11.81" to 15.75": 40 mm 1.57"400 to 500 mm 15.75" to 19.69": 50 mm 1.97"Display resolution1 to 5 (1 to 5 mm 0.04" to 0.20")Spot sizeApprox. ø3 mm ø0.12"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 2 laser product (IEC60825-1)Class II Laser product (FDA(CDRH) Part1040.10)FunctionIndicator3-digit 7-segment display (white),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 10,000 lux or lessSunlight: 20,000 lux or less at 250 mm 9.84"*4Incandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less at 500 mm 19.69"*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual, FDA warning/certification/identification label,Laser warning/explanation labelsWeightApprox. 55 g*1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office.*2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: OP-73865

Order No: OP-73865

SKU: 10000019238001

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.05kg

OP-73865

ModelOP-73864TypeConnector CableApplicable productFS-N1*C, FS-V30C, PZ-G, M8 connector sensorNumber included1 pcs.Cable endM8 straight - Loose wireLength2 m 6.56'MaterialCable: Polyvinyl chloride (PVC)WeightApprox. 55 g

Model: LR-ZH500CN

Order No: LR-ZH500CN

SKU: 10000063196801

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZH500CN

ModelLR-ZH500CNTypeU.C.D. FunctionDistance based laser sensorAppearanceRectangularOutputNPNCable connectionM8 connector, 4-pinDetectable distance35 to 500 mm 1.38" to 19.69"(465 to 0)*1Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 300 mm 7.09" to 11.81": 25 mm 0.98"300 to 400 mm 11.81" to 15.75": 40 mm 1.57"400 to 500 mm 15.75" to 19.69": 50 mm 1.97"Display resolution1 to 5 (1 to 5 mm 0.04" to 0.20")Spot sizeApprox. ø3 mm ø0.12"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 2 laser product (IEC60825-1)Class II Laser product (FDA(CDRH) Part1040.10)FunctionIndicator3-digit 7-segment display (white),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*2, Diversey*2Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 10,000 lux or lessSunlight: 20,000 lux or less at 250 mm 9.84"*3Incandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less at 500 mm 19.69"*3Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual, FDA warning/certification/identification label,Laser warning/explanation labelsWeightApprox. 55 g*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 Have passed resistance tests with cleaning agents from multiple manufactures.*3 When the response time is 10 ms

Model: LR-ZH500N

Order No: LR-ZH500N

SKU: 10000008343401

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.11kg

LR-ZH500N

ModelLR-ZH500NTypeU.C.D. FunctionDistance based laser sensorAppearanceRectangularOutputNPNCable connection2 m cableDetectable distance35 to 500 mm 1.38" to 19.69"(465 to 0)*1Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 300 mm 7.09" to 11.81": 25 mm 0.98"300 to 400 mm 11.81" to 15.75": 40 mm 1.57"400 to 500 mm 15.75" to 19.69": 50 mm 1.97"Display resolution1 to 5 (1 to 5 mm 0.04" to 0.20")Spot sizeApprox. ø3 mm ø0.12"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 2 laser product (IEC60825-1)Class II Laser product (FDA(CDRH) Part1040.10)FunctionIndicator3-digit 7-segment display (white),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*2, Diversey*2Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 10,000 lux or lessSunlight: 20,000 lux or less at 250 mm 9.84"*3Incandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less at 500 mm 19.69"*3Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual, FDA warning/certification/identification label,Laser warning/explanation labelsWeightApprox. 110 g (Including cable)*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 Have passed resistance tests with cleaning agents from multiple manufactures.*3 When the response time is 10 ms

Model: LR-ZH500C3P

Order No: LR-ZH500C3P

SKU: 10000007764801

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZH500C3P

ModelLR-ZH500C3P*1*2TypeU.C.D. FunctionDistance based laser sensorAppearanceRectangularOutputPNPCable connectionM8 connector, 3-pinDetectable distance35 to 500 mm 1.38" to 19.69"(465 to 0)*3Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 300 mm 7.09" to 11.81": 25 mm 0.98"300 to 400 mm 11.81" to 15.75": 40 mm 1.57"400 to 500 mm 15.75" to 19.69": 50 mm 1.97"Display resolution1 to 5 (1 to 5 mm 0.04" to 0.20")Spot sizeApprox. ø3 mm ø0.12"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 2 laser product (IEC60825-1)Class II Laser product (FDA(CDRH) Part1040.10)FunctionIndicator3-digit 7-segment display (white),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*4, Diversey*4Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 10,000 lux or lessSunlight: 20,000 lux or less at 250 mm 9.84"*5Incandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less at 500 mm 19.69"*5Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual, FDA warning/certification/identification label,Laser warning/explanation labelsWeightApprox. 55 g*1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office.*2 M8 connector (3-pin) type does not include the external input function.*3 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*4 Have passed resistance tests with cleaning agents from multiple manufactures.*5 When the response time is 10 ms

Model: LR-ZH490CB

Order No: LR-ZH490CB

SKU: 10000006701201

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.07kg

LR-ZH490CB

ModelLR-ZH490CB*1TypeU.C.D. FunctionDistance based laser sensorAppearanceM18 Threaded mountOutputNPN/PNP selectableCable connectionM12 connector, 4-pinDetectable distance25 to 490 mm 0.98" to 19.29" (465 to 0)*2Standard detectable deviation25 to 170 mm 0.98" to 6.69": 9 mm 0.35"170 to 290 mm 6.69" to 11.42": 25 mm 0.98"290 to 390 mm 11.42" to 15.35": 40 mm 1.57"390 to 490 mm 15.35" to 19.29": 50 mm 1.97"Display resolution1 to 5 (1 to 5 mm 0.04" to 0.20")Spot sizeApprox. ø3 mm ø0.12"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 2 laser product (IEC60825-1)Class II Laser product (FDA(CDRH) Part1040.10)FunctionIndicator3-digit 7-segment display (white),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN open collector/PNP Open collector selectable,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 10,000 lux or lessSunlight: 20,000 lux or less at 240 mm 9.45"*4Incandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less at 490 mm 19.29"*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM, Nut: SUS316L, Lock washer: SUS304Accompanying itemsInstruction Manual, FDA warning/certification/identification label,Laser warning/explanation labelsWeightApprox. 75 g*1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. (LR-ZH490CB : Only when PNP output is selected.) You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office.*2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB250CP

Order No: LR-ZB250CP

SKU: 10000006792301

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZB250CP

ModelLR-ZB250CPTypeDistance based laser sensorAppearanceRectangularOutputPNPCable connectionM8 connector, 4-pinDetectable distance35 to 250 mm 1.38" to 9.84" (215 to 0)*1Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 250 mm 7.09" to 9.84": 25 mm 0.98"Display resolution1 to 3 (1 to 3 mm 0.04" to 0.12")Spot sizeApprox. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 55 g*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB250CN

Order No: LR-ZB250CN

SKU: 10000008318801

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZB250CN

ModelLR-ZB250CNTypeDistance based laser sensorAppearanceRectangularOutputNPNCable connectionM8 connector, 4-pinDetectable distance35 to 250 mm 1.38" to 9.84" (215 to 0)*1Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 250 mm 7.09" to 9.84": 25 mm 0.98"Display resolution1 to 3 (1 to 3 mm 0.04" to 0.12")Spot sizeApprox. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 55 g*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB250C3P

Order No: LR-ZB250C3P

SKU: 10000007971901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZB250C3P

ModelLR-ZB250C3P*1TypeDistance based laser sensorAppearanceRectangularOutputPNPCable connectionM8 connector, 3-pinDetectable distance35 to 250 mm 1.38" to 9.84" (215 to 0)*2Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 250 mm 7.09" to 9.84": 25 mm 0.98"Display resolution1 to 3 (1 to 3 mm 0.04" to 0.12")Spot sizeApprox. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*3)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*4, Diversey*4Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less*5Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 55 g*1 M8 connector (3-pin) type does not include the external input function.*2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*4 Have passed resistance tests with cleaning agents from multiple manufactures.*5 When the response time is 10 ms

Model: LR-ZB240CB

Order No: LR-ZB240CB

SKU: 10000006791201

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.07kg

LR-ZB240CB

ModelLR-ZB240CBTypeDistance based laser sensorAppearanceM18 Threaded mountOutputBipolar (NPN+PNP)Cable connectionM12 connector, 4-pinDetectable distance25 to 240 mm 0.98" to 9.45" (215 to 0)*1Standard detectable deviation25 to 170 mm 0.98" to 6.69": 9 mm 0.35"170 to 240 mm 6.69" to 9.45": 25 mm 0.98"Display resolution1 to 3 (1 to 3 mm 0.04" to 0.12")Spot sizeApprox. 2.4 × 1.2 mm 0.09" × 0.05" at 240 mm 9.45"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN+PNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputNoneEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °FStorage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM, Nut: SUS316L, Lock washer: SUS304Accompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 75 g*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB250AP

Order No: LR-ZB250AP

SKU: 10000012637601

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.11kg

LR-ZB250AP

ModelLR-ZB250APTypeDistance based laser sensorAppearanceRectangularOutputPNPCable connection2 m cableDetectable distance35 to 250 mm 1.38" to 9.84" (215 to 0)*1Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 250 mm 7.09" to 9.84": 25 mm 0.98"Display resolution1 to 3 (1 to 3 mm 0.04" to 0.12")Spot sizeApprox. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 110 g (Including cable)*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB100P

Order No: LR-ZB100P

SKU: 10000013727501

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.11kg

LR-ZB100P

ModelLR-ZB100PTypeDistance based laser sensorAppearanceRectangularOutputPNPCable connection2 m cableDetectable distance35 to 100 mm 1.38" to 3.94" (650 to 0)*1Standard detectable deviation35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06"50 to 100 mm 1.97" to 3.94": 3 mm 0.12"Display resolution2 (0.2 mm 0.008")Spot sizeApprox. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 4,000 lux or lessSunlight: 8,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 110 g (Including cable)*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB250AN

Order No: LR-ZB250AN

SKU: 10000006904801

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZB250AN

ModelLR-ZB250ANTypeDistance based laser sensorAppearanceRectangularOutputNPNCable connection2 m cableDetectable distance35 to 250 mm 1.38" to 9.84" (215 to 0)*1Standard detectable deviation35 to 180 mm 1.38" to 7.09": 9 mm 0.35"180 to 250 mm 7.09" to 9.84": 25 mm 0.98"Display resolution1 to 3 (1 to 3 mm 0.04" to 0.12")Spot sizeApprox. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 2,000 lux or lessSunlight: 4,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 110 g (Including cable)*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB100N

Order No: LR-ZB100N

SKU: 10000006659301

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.11kg

LR-ZB100N

ModelLR-ZB100NTypeDistance based laser sensorAppearanceRectangularOutputNPNCable connection2 m cableDetectable distance35 to 100 mm 1.38" to 3.94" (650 to 0)*1Standard detectable deviation35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06"50 to 100 mm 1.97" to 3.94": 3 mm 0.12"Display resolution2 (0.2 mm 0.008")Spot sizeApprox. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 4,000 lux or lessSunlight: 8,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 110 g (Including cable)*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB100C3P

Order No: LR-ZB100C3P

SKU: 10000014082601

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZB100C3P

ModelLR-ZB100C3P*1TypeDistance based laser sensorAppearanceRectangularOutputPNPCable connectionM8 connector, 3-pinDetectable distance35 to 100 mm 1.38" to 3.94" (650 to 0)*2Standard detectable deviation35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06"50 to 100 mm 1.97" to 3.94": 3 mm 0.12"Display resolution2 (0.2 mm 0.008")Spot sizeApprox. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*3)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*4, Diversey*4Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 4,000 lux or lessSunlight: 8,000 lux or less*5Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 55 g*1 M8 connector (3-pin) type does not include the external input function.*2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*4 Have passed resistance tests with cleaning agents from multiple manufactures.*5 When the response time is 10 ms

Model: PZ-V32P

Order No: PZ-V32P

SKU: 10000007727301

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.01kg

Model: LR-ZB100CN

Order No: LR-ZB100CN

SKU: 10000033200201

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZB100CN

ModelLR-ZB100CNTypeDistance based laser sensorAppearanceRectangularOutputNPNCable connectionM8 connector, 4-pinDetectable distance35 to 100 mm 1.38" to 3.94" (650 to 0)*1Standard detectable deviation35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06"50 to 100 mm 1.97" to 3.94": 3 mm 0.12"Display resolution2 (0.2 mm 0.008")Spot sizeApprox. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputNPN Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 4,000 lux or lessSunlight: 8,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 55 g*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: LR-ZB100CP

Order No: LR-ZB100CP

SKU: 10000008451301

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

LR-ZB100CP

ModelLR-ZB100CPTypeDistance based laser sensorAppearanceRectangularOutputPNPCable connectionM8 connector, 4-pinDetectable distance35 to 100 mm 1.38" to 3.94" (650 to 0)*1Standard detectable deviation35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06"50 to 100 mm 1.97" to 3.94": 3 mm 0.12"Display resolution2 (0.2 mm 0.008")Spot sizeApprox. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"Response time1.5 ms / 10 ms / 50 ms selectableLight sourceTypeRed laser (660 nm)Laser classClass 1 laser product(IEC60825-1, FDA (CDRH) Part1040.10*2)FunctionIndicator3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange),1 spot indicator (green)TimerOFF/ON delay/OFF delay/One-shotSpecificationsPower voltage10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPSPower consumption450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)Control outputPNP Open collector,Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mAProtection circuitProtection against reverse power connection, output overcurrent, output surge, reverse output connectionOutput operationLight-ON / Dark-ON selectableExternal inputInput time calibration: 35 ms or more ON, 35 ms or more OFFLaser emission stop: 2 ms or more ON, 20 ms or more OFFShort-circuit current NPN: 1 mA or less/PNP: 2 mA or lessEnvironmental resistanceEnclosure ratingIP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB*3, Diversey*3Insulation resistance20 MΩ or more (500 VDC)Ambient lightIncandescent lamp: 4,000 lux or lessSunlight: 8,000 lux or less*4Ambient temperature-10 to +50 °C 14 to 122 °F (No freezing)Storage temperature-25 to +75 °C -13 to 167 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Withstand voltage1,000 VAC, 50/60 Hz, 1 minVibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsMaterialCase: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKMAccompanying itemsInstruction Manual,Certification/Identification label (FDA)WeightApprox. 55 g*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.*3 Have passed resistance tests with cleaning agents from multiple manufactures.*4 When the response time is 10 ms

Model: PZ-V12P

Order No: PZ-V12P

SKU: 10000007639301

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.00kg

Model: OP-88296

Order No: OP-88296

SKU: 10000063196001

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.01kg

OP-88296

ModelOP-88296TypeLoose wires/M12 adapterApplicable productFD-XA1/XA5 cables, or cables with cross sectional area 0.14 to 0.34 mm2and outer diameter ø 3.5 to 6 mm 0.14 " to 0.24 "Frequency of connections between conductors of the same cross section10Insertion/withdrawal cycles More than 100 timesWire diameter including insulationø 0.7 to 1.6 mm 0.028 " to 0.06 "enclosure ratingIP65/67Ambient temperature-25 °C to +80 °C -13 to 176 °FNoteA connector that converts loose wires to a M12 4-pin connector. Useful for connecting to IO-Link compatible master units.WeightApprox. 12 g

Model: OP-26751

Order No: OP-26751

SKU: 10000020192801

Condition: New Sealed Under Guarantee

Size: 100.00 mm，120.00 mm，25.00 mm

Weight: 0.01kg

OP-26751

ModelFU-2540TypeAdjustable beam spotSpot diameterø0.9 to 3.5 mmø0.035" to 0.138"

Model: PZ-M62P

Order No: PZ-M62P

SKU: 10000007753901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.01kg

Model: OP-88505

Order No: OP-88505

SKU: 10000063195301

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.08kg

OP-88505

ModelOP-88505TypeHigh-flexSensor SideM8 4-Pin StraightCable ConnectorLoose wiresLength2 m 6.6'Material Cable: PVC, Connector: Nickel-plated brassWeightApprox. 80 g

Model: LR-XH250

Order No: LR-XH250

SKU: 10000063195001

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.07kg

LR-XH250

ModelLR-XH250TypeCable Length: 2 m 6.6'Detecting Distance30 to 250 mm 1.18" to 9.84"Standard Detectable Deviation30 to 180 mm: 9 mm, 180 to 250 mm: 18 mm1.18" to 7.09": 0.35", 7.09" to 9.84": 0.71Display Resolution1 to 2 mm 0.04" to 0.08"Spot SizeApprox. 0.8 mm × 1.2 mm 0.03" × 0.05"(at a detecting distance of 250 mm 9.84")Light SourceTypeGreen laser (505 nm)Laser ClassClass 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10*1)Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp: 8000 lux or less, Sunlight: 8000 lux or lessAmbient temperature-10°C to +50°C 14°F to 122°F (no freezing)Relative humidity35 to 85% RH (no condensation)Vibration resistance10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axesShock resistance1000 m/s2 (100G); 6 times each for X, Y, and Z axesMaterialCase: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)AccessoriesLaser warning labelWeightapprox. 75 g*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No. 56.

Model: PZ-M53P

Order No: PZ-M53P

SKU: 10000046396701

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.10kg

Model: LR-XH100

Order No: LR-XH100

SKU: 10000024960801

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.07kg

LR-XH100

ModelLR-XH100TypeCable Length: 2 m 6.6'Detecting Distance25.0 to 100.0 mm 0.98" to 3.94"Standard Detectable Deviation1.0 mm 0.04"Display Resolution0.1 mm 0.004"Spot SizeApprox. 0.3 mm × 2 mm 0.012" × 0.08"(at a detecting distance of 100 mm 3.94")Light SourceTypeGreen laser (505 nm)Laser ClassClass 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10*1)Environmental resistanceEnclosure ratingIP65/IP67 (IEC60529)Ambient lightIncandescent lamp: 16,000 lux or less, Sunlight: 16000 lux or lessAmbient temperature-10°C to +50°C 14°F to 122°F (no freezing)Relative humidity35 to 85% RH (no condensation)Vibration resistance10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axesShock resistance1000 m/s2 (100G); 6 times each for X, Y, and Z axesMaterialCase: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)AccessoriesLaser warning labelWeightapprox. 75 g*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No. 56.

Model: PZ-M52P

Order No: PZ-M52P

SKU: 10000015200401

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.06kg

Model: LR-XN11C

Order No: LR-XN11C

SKU: 10000024960901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.02kg

LR-XN11C

ModelLR-XN11CTypeNPN Output/PNP Output (Selectable output)Cable/ConnectorM8 connector*1Main Unit/Expansion UnitMain Unit (expansion not possible)No. of Control Outputs2*2No. of External Inputs1*2Response Time500 µs*3/1 ms/3 ms/10 ms/200 ms SelectableIO-LinkSpecification v1.1/COM2 (38.4 kbps)FunctionsTimer FunctionTimer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shotI/OControl OutputOpen collector, 30 VDC or lower, N.O./N.C.100 mA or lower for 1 output; 100 mA or lower in total for 2 outputsResidual voltage NPN: 1.4 V or lower (output current: 10 mA or lower)/2 V or lower (output current: 10 to 100 mA), PNP: 1.6 V or lower (output current: 10 mA or lower)/2.2 V or lower (output current: 10 to 100 mA)External InputExternal Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectableShort circuit current - NPN: 1 mA or lower, PNP: 2 mA or lowerInput time: 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF only when External Set is selected)Unit Expansion—Protection CircuitProtection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connectionNumber of Interference Prevention Devices—Power supplyPower voltage16 to 30 VDC*4 (including 10% ripple (P-P) or less), class 2Power consumptionDuring normal operation: 1150 mW (47 mA or lower at 24 V, 64 mA or lower at 16 V), ECO ON/ALL: 985 mW (40 mA or lower at 24 V, 53 mA or lower at 16 V) (excluding Load Current)Environmental resistanceAmbient temperature−20 to +55°C -4°F to 131°F (no freezing)*5Relative humidity35 to 85% RH (no condensation)Vibration resistance10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz; X, Y, and Z directionsShock resistance500 m/s2 (50G); 3 times each for X, Y, and Z axesCase MaterialMain Unit and Cover: PolycarbonateAccessoriesInstruction manualWeightApprox. 22 g*1 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 m 65.6' or less when connecting via IO-Link.*2 Output 2 and the external input are selectable.*3 If 500 µs is selected, the following limitations apply.· Only 2-point calibration can be performed.· The detection range masking is set during calibration. (Manual setting of the masking range is not supported.)· Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used.· The interference prevention function is not supported*4 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher.*5 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°F

Model: AI-B160

Order No: AI-B160

SKU: 10000063198901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.12kg

Model: PZ2-61

Order No: PZ2-61

SKU: 10000069073201

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

PZ2-61

ModelPZ2-61TypeRetro-reflective PolarizedDetection distance2,5 m 98.43" (with R-2)Light sourceRed LEDDetectable objectOpaque material with an area of 30 mm2 or moreHysteresis(of detecting distance)-Sensitivity adjustment1-turn trimmer (240°)Response time1 ms max.Operation modeLIGHT-ON/DARK-ON (switch-selectable)Indicator lampOutput and power*1: Red LED, Stable operation: Green LEDControl outputNPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max.Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumption35 mA or lessEnvironmental resistanceEnclosure ratingIP67Ambient lightIncandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsCase materialGlass-fiber reinforced plasticAccessoriesreflector (R-2) x 1, Mounting bracket x 1, Mounting screws x 2, Plate nut x 1WeightApprox. 50 g (including 2-m 6.6' connector cable)*1 The power indicator is equipped with the PZ2-51 only.

Model: PZ2-51

Order No: PZ2-51

SKU: 10000069073001

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.10kg

PZ2-51

ModelPZ2-51TypeThrubeamDetection distance7 m 23.0'Light sourceRed LEDDetectable objectOpaque material with an area of 30 mm2 or moreHysteresis(of detecting distance)-Sensitivity adjustment1-turn trimmer (240°)Response time1.5 ms max.Operation modeLIGHT-ON/DARK-ON (switch-selectable)Indicator lampOutput and power*1: Red LED, Stable operation: Green LEDControl outputNPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max.Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumptionTransmitter: 20 mA or less, Receiver: 25 mA or lessEnvironmental resistanceEnclosure ratingIP67Ambient lightIncandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsCase materialGlass-fiber reinforced plasticAccessoriesMounting bracket x 2, Mounting screws x 4, Plate nut x 2WeightApprox. 50 g (including 2-m 6.6' connector cable)*1 The power indicator is equipped with the PZ2-51 only.

Model: PZ2-42

Order No: PZ2-42

SKU: 10000009537101

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

PZ2-42

ModelPZ2-42TypeDiffuse-reflective Short-rangeDetection distance100 mm 3.94" (100 x 100 mm 3.94" x 3.94" white mat paper)Light sourceRed LEDDetectable objectTransparent and opaqueHysteresis(of detecting distance)20 % max.Sensitivity adjustment1-turn trimmer (240°)Response time1 ms max.Operation modeLIGHT-ON/DARK-ON (switch-selectable)Indicator lampOutput and power*1: Red LED, Stable operation: Green LEDControl outputNPN or PNP: 100 mA (40 V) max., Residual voltage: 1 V max.Protection circuitReversed polarity, overcurrent protection, surge absorberRatingPower voltage12 to 24 VDC ±10 %, Ripple (P-P) 10 % or lessCurrent consumption35 mA or lessEnvironmental resistanceEnclosure ratingIP67Ambient lightIncandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.Ambient temperature-20 to +55 °C -4 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance1,000 m/s2, 6 times in each of the X, Y, and Z directionsCase materialGlass-fiber reinforced plasticAccessoriesMounting bracket x 1, Mounting screws x 2, Plate nut x 1WeightApprox. 50 g (including 2-m 6.6' connector cable)*1 The power indicator is equipped with the PZ2-51 only.

Model: PZ-V31

Order No: PZ-V31

SKU: 10000021518601

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

Model: PZ-M61

Order No: PZ-M61

SKU: 10000053599101

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

Model: PZ-M31

Order No: PZ-M31

SKU: 10000032974901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

Model: PZ-M11

Order No: PZ-M11

SKU: 10000008691901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

Model: PZ-B61

Order No: PZ-B61

SKU: 10000049709501

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.09kg

PZ-B61

ModelPZ-B61TypeL-shaped mounting bracket (Tough)Applicable productFor the standard (square) cable typeNumber included1 unitMaterialMounting bracket: SUS304Screw: Stainless steelWeightApprox. 90 g

Model: PX-H72

Order No: PX-H72

SKU: 10000010188601

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.09kg

PX-H72

ModelPX-H72*1TypeM12 Thrubeam StandardLight source LEDInfrared LED (Wavelength：870 nm)Detecting distanceTURBO10 m 32.8'SUPER15 m 49.2'ULTRA30 m 98.4'MEGA40 m 131.2'Detectable objectø7.5 mm ø0.30"Opaque materialsSpot diameter―Environmental resistanceEnclosure ratingIEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69KAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7AccessoriesScrew nut (SUS303) x 4, toothed washer (SUS304) x 2WeightApprox. 90 g (Including cable)*1 The PX-H71 and the H71TZ are available with a 10 m 32.8' cable for both transmitter and receiver.

Model: PX-H71

Order No: PX-H71

SKU: 10000010188401

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.08kg

PX-H71

ModelPX-H71*1TypeM8 Thrubeam StandardLight source LEDRed 4-eleant LED (Wavelength：635 nm)Detecting distanceTURBO4 m 13.1'SUPER6 m 19.7'ULTRA12 m 39.4'MEGA20 m 65.6'Detectable objectø4 mm ø0.16" Opaque materialsSpot diameter―Environmental resistanceEnclosure ratingIEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69KAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7AccessoriesScrew nut (SUS303) x 4, toothed washer (SUS304) x 2WeightApprox. 80 g (Including cable)*1 The PX-H71 and the H71TZ are available with a 10 m 32.8' cable for both transmitter and receiver.

Model: PX-H61

Order No: PX-H61

SKU: 10000069070001

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.08kg

PX-H61

ModelPX-H61TypeM12 Reflective StandardLight source LEDRed 4-element LED (Wavelength：635 nm)Detecting distanceTURBO400 mm 15.7"SUPER600 mm 23.6"ULTRA1200 mm 47.2"MEGA2000 mm 78.7"Detectable object―Spot diameterApprox. 15 x 15 mm 0.59"at 100 mm 3.94"Approx. 65 x 65 mm 2.56"at 500 mm 19.69"Environmental resistanceEnclosure ratingIEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69KAmbient lightIncandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.Ambient temperature-10 to +55 °C 14 to 131 °F (No freezing)Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7AccessoriesScrew nut x 2,toothed washer x 1WeightApprox. 80 g*1 (Including cable)*1 The PX-H71G, H72G and H61G have SUS304 spiral protective tube on the cables.

Model: PX-10P

Order No: PX-10P

SKU: 10000018400101

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.10kg

PX-10P

ModelPX-10PTypeCable typeOutputPNPResponse time500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)Output selectionLIGHT-ON/DARK-ONIndicator lamp- Operation indicator：Red LED x 2, DSC orange LED x 1- Dual digital monitor：Dual 7-segment display[Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together,current value range：0 to 65504, excess gain：0 P to 999 P]- Hold function：Possible to display both peak and bottom hold values. Selectable from 5 variations.- Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)]- Scaling displayDetection modeLight intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]Shift functionVariable between –1999 and 9999Timer functionTimer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shotTimer duration selectable：1 ms to 9999 msMaximum error against the setting value：10% max.Control outputPNP open-collector 30 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.External inputInput time 2 ms (ON)/20 ms (OFF) min.Interference preventionUp to 4 units (in all power modes)*1RatingPower voltage12 to 24 VDC, Ripple (P-P) 10 % or less, Class2*2Power consumptionStandard mode：50 mA max. at 24 V/55 mA max. at 12 VPower saving mode：40 mA max. at 24 V/45 mA max. at 12 VEnvironmental resistanceEnclosure ratingIEC: IP67/JEM: IP67/NEMA: 4XAmbient temperature-10 to +55 °C 14 to 131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing：PBT, display：PSU, display cover/connector cover：SUS304, radiator plate：SUS304, gasket：NBRWeightApprox. 100 g (Including cable)*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affectedsomewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts.*2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72).*3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below.2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

Model: PX-10C

Order No: PX-10C

SKU: 10000069069901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.05kg

PX-10C

ModelPX-10CTypeConnector typeOutputNPNResponse time500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)Output selectionLIGHT-ON/DARK-ONIndicator lamp- Operation indicator：Red LED x 2, DSC orange LED x 1- Dual digital monitor：Dual 7-segment display[Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together,current value range：0 to 65504, excess gain：0 P to 999 P]- Hold function：Possible to display both peak and bottom hold values. Selectable from 5 variations.- Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)]- Scaling displayDetection modeLight intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]Shift functionVariable between –1999 and 9999Timer functionTimer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shotTimer duration selectable：1 ms to 9999 msMaximum error against the setting value：10% max.Control outputNPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.External input―Interference preventionUp to 4 units (in all power modes)*1RatingPower voltage12 to 24 VDC, Ripple (P-P) 10 % or less, Class2*2Power consumptionStandard mode：50 mA max. at 24 V/55 mA max. at 12 VPower saving mode：40 mA max. at 24 V/45 mA max. at 12 VEnvironmental resistanceEnclosure ratingIEC: IP67/JEM: IP67/NEMA: 4XAmbient temperature-10 to +55 °C 14 to 131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsCase materialHousing：PBT, display：PSU, display cover/connector cover：SUS304, radiator plate：SUS304, gasket：NBRWeightApprox. 50 g*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affectedsomewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts.*2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72).*3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below.2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

Model: PS-N10

Order No: PS-N10

SKU: 10000069070901

Condition: New Sealed Under Guarantee

Size: 12.00 cm，10.00 cm，3.50 cm

Weight: 0.02kg

PS-N10

ModelPS-N10TypeZero lineOutput-Main unit/Expansion unitExpansion unitI/OControl outputsNone*1External inputNoneOutput selectionLIGHT-ON/DARK-ON (switch-selectable)Timer functionTimer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9999 ms, Maximum error against the setting value: ±10% max.Control output―Number of interference prevention units4 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled)Response time500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)External inputInput time 2 ms (ON)/20 ms (OFF) or more*2Case sizeH 32.6 mm 1.28"× W 9.8 mm 0.39" × L 78.7 mm 3.1"Unit expansionUp to 16 units (Up to 17 units including 1 main unit can be connected in total.)Protection circuitReverse polarity protection, Over-current protection, Surge absorberRatingPower voltage24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPSPower consumptionNormal: 810 mW or less (at 30V. 28 mA max. at 24 V, 34 mA max. at 12 V)Eco on mode: 700 mW or less (at 30V. 24 mA max. at 24 V, 27 mA max. at 12 V) Eco Full mode: 490 mW or less (at 30V. 17 mA max. at 24 V, 20 mA max. at 12 V)Environmental resistanceAmbient temperature-20 to +55 °C -4 to 131 °F (No freezing)*3Relative humidity35 to 85 % RH (No condensation)Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directionsShock resistance500 m/s2, 3 times in each of the X, Y, and Z directionsMaterialCaseMain unit and cover material: PolycarbonateCablePVCWeightApprox. 20 g*1 Counted as one output when added to a NU Series communication unit.*2 Input time is 25 ms (ON)/25 ms (OFF) when the external calibration time is selected.*3 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a unit.One or two more units connected: -20 to +55 °C -4 to 131 °F; 3 to 10 more units connected: -20 to +50 °C -4 to 122 °F; 11 to 16 more units connected: -20 to +45 °C -4 to 113 °F.