Mercotac M 230

Mercotac M 230

Availability: In Stock

Deskripsi

Terminal 16 - 14 AWG (qty. 2 included)		57230 Boot Kit for dust / splash protection IP51

	55250 16 - 14 AWG (qty. 2 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

Model 230 Standard Wire Connections

Model 230 Wire Connections With Optional Boot Kit

Model 230 Suggested Mounting Methods

Model 230 is typically mounted by the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
230 et al		.998" (25.35)	.80" (20)

Typical Bushing Mount Hole Dimensions
230 et al		.500" (12.70)	.40" (10)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions

PT.BANDAR ANEKA TEKNIK INDONESIA

The Centro Metrobroadway A-52 (3rd Floor)

Jl. Pantai Indah Utara II - Pantai Indah Kapuk

Jakarta Utara 14460

Lihat Juga

MERCOTAC 830

MERCOTAC 830

PSENcode - non-contact, coded safety switches

PSENcode - non-contact, coded safety switches

E3AS-HL / F / L Series

E3AS-HL / F / L Series

Contactors, Overloads, and Breakers

Contactors, Overloads, and Breakers

High Current SMT Power Inductor

High Current SMT Power Inductor

Mitsubishi Power Supply Q61P

Mitsubishi Power Supply Q61P

GR18

GR18

MULTIFEEDER BTSR

MULTIFEEDER BTSR