Eight Conductors

MERCOTAC 830

Model 830 Eight Conductors, 2@4amps, 6@30amps Disconnects included (4 sm., 12 lg.) Boot Kit available Available with stainless steel ball bearing (830-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

830

0-250

2@4/6@30

100

<1m

200

140 (60) /-20(-29)

1000

>25M

830-SS

0-250

2@4/6@30

100

<1m

200

140 (60) /-20(-29)

1000

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 830 Accessories


55110 22 - 18 AWG (qty. 4 included)	55253 Shrink Tube (qty. 6 included)		55252 Terminal 16 - 14 AWG (qty. 6 included)

55251 Terminal 16 - 14 AWG (qty. 6 included)		57830 Boot Kit for dust or splash protection IP51

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

Model 830 Standard Wire Connections

Model 830 Wire Connections With Optional Boot Kit

Model 830 Suggested Mounting Methods

Model 830 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
830, et al		1.772" (45.00)	.80" (20)

Typical Bushing Mount Hole Dimensions
830, et al		1.125" (28.57)	.40" (10)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)