Photoelectric Sensors

Long Range & Wide Area Photoelectric Sensor PX-2

Long Range & Wide Area Photoelectric Sensor PX-2

Type			Standard model		Auxiliary sensor connectable model
			Standard model			With external control function		Long sensing range
				Short sensing range			Short sensing range	Long sensing range
Model No.			PX-22	PX-21	PX-24	PX-24ES	PX-23ES	PX-26
CE marking directive compliance			EMC Directive, RoHS Directive
Sensing range (OUT 1 and OUT 2 areas) (Note 2)			3 m 9.843 ft	1 m 3.281 ft	3 m 9.843 ft		1 m 3.281 ft	5 m 16.404 ft
Hysteresis (Note 2)			15 % or less of operation distance
Supply voltage			10 to 31 V DC including ripple
Power consumption (Note 3)			Under operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
OUT1 (OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas) OUT2 (OR circuit among the effective center, left and right OUT 2 areas)			NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 40 V DC or less (between OUT 1 / OUT 2 and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
		Utilization category	DC-12 or DC-13
		Output operation	Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)
		Short-circuit protection	Incorporated
Extraneous light monitor output			-		NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 40 V DC or less (between extraneous light monitor output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
		Output operation	-		ON when modulated beam other than its own (including auxiliary sensor's) light is received
		Short-circuit protection	-		-
		Response time	80 ms or less

Whatsapp

Water Detection Sensor EZ-10

Water Detection Sensor EZ-10

Type		NPN output	PNP output
Model No.		EZ-11	EZ-11-PN
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Sensing range		5 m 16.404 ft (without container or pipe) (Note 2)
Sensing object		ø12 mm ø0.472 mm or more liquid which contains water, or opaque object (Note 3)
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Emitter: 25 mA or less, Receiver: 25 mA or less
Output		NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)	PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) 0.4 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Output operation	Switchable either Light-ON or Dark-ON
Response time		12 ms or less
Sensitivity adjuster		Continuously variable adjuster

Whatsapp

Leak Detection Sensor EX-F70/EX-F60

Leak Detection Sensor EX-F70/EX-F60

Type		General purpose		Chemical-resistant
Type		SUS mounting bracket type	PVC mounting bracket type	PFA mounting bracket type	PVC mounting bracket type
Model No.	NPN output	EX-F71	EX-F72	EX-F61	EX-F62
Model No.	PNP output	EX-F71-PN	EX-F72-PN	EX-F61-PN	EX-F62-PN
Applicable regulations and certifications		- (Note 8)		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Sensing object		Water, Fluorinert™ (Note 2, 3)		Water, Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc. (Note 2, 4, 6)
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		10 mA or less (PNP output type: 15 mA or less)		15 mA or less
Output		<NPN output type> NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.0 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.0 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Output operation	In normal state: ON, When leak detected or the sensor is mounted improperly: OFF
	Short-circuit protection	Incorporated
Response time		50 ms or less

Whatsapp

Pipe-mountable Liquid Level Detection Sensor EX-F1

Pipe-mountable Liquid Level Detection Sensor EX-F1

Type		Amplifier built-in, Pipe-mountable
Model No.		EX-F1
Applicable regulations		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing object		Liquid (Note 2)
Applicable pipe diameter		Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note 3)
Supply voltage / Current consumption		12 to 24 V DC ± 10 % Ripple P-P 10 % or less / 30 mA or less
Output		NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
	Utilization category	DC-12 or DC-13
	Output operation	Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON)
	Short-circuit protection	Incorporated
Response time		2 ms or less
Operation indicator		Red LED (lights up when the output is ON)
Pollution degree		3 (Industrial environment)

Whatsapp

LED Type Wafer Alignment Sensor Controller HD-T1C

LED Type Wafer Alignment Sensor Controller HD-T1C

Model No.		HD-T1C
Applicable sensor head		HD-T1030
Supply voltage		24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		70 mA or less (Including sensor head)
Analog output		Analog voltage - Output voltage: 1 ± 0.5 V (all light interrupted) to 5 ± 0.5 V (all light received) - Output impedance: 75 Ω
	Response time	0.5 ms or less (8 V/ms or more)
	Resolution	30 μm 1.181 mil (Note 2)
	Linearity	±1.0 % F.S. (at 28 mm 1.102 in sensing width of the sensing center) (Note 3)
	Temperature characteristics	±0.1 % F.S./℃ (at 24 ± 2 ℃ 75.2 ± 35.6 ℉) (Note 3)
Span adjustment function		Span of the analog output voltage is adjusted. 15-turn endless adjuster
Shift adjustment function		Offset of the analog output voltage is adjusted. 15-turn endless adjuster
Warming-up period		30 min. or more
Environmental resistance	Pollution degree	3 (Industrial environment)
	Ambient temperature	0 to +40 ℃ +32 to +104 ℉, Storage: -20 to +70 ℃ -4 to +158 ℉
	Ambient humidity	35 to 85 % RH (No dew condensation)
	Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
	Insulation resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
	Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s², in X, Y and Z directions for two hours each
	Shock resistance	490 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each

Whatsapp

LED Type Wafer Alignment Sensor Controller HD-T1

LED Type Wafer Alignment Sensor Controller HD-T1

Model No.		HD-T1030
Applicable controller		HD-T1C
Sensing width		30 mm 1.181 in (Linearity is specified at 28 mm 1.102 in width.)
Sensing range		30 mm 1.181 in (fixed) (Note 2)
Pollution degree		3 (Industrial environment)
Ambient temperature		0 to +40 ℃ +32 to +104 ℉, Storage: -20 to +55 ℃ -4 to +131 ℉
Ambient humidity		35 to 85 % RH (No dew condensation)
Ambient illuminance		Incandescent light: 3,000 lx or less at the light-receiving face, Fluorescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s², in X, Y and Z directions for two hours each
Shock resistance		490 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element		Red LED (Peak emission wavelength: 650 nm 0.026 mil)
Receiving element		Photodiode
Material		Enclosure: PEI and Aluminum, Front cover: Glass, Mounting base: Aluminum
Cable		PVC cable, 0.5 m 1.640 ft long, with a connector at the end
Weight		Net weight: 150 g approx.

Whatsapp

Adjustable Range Reflective

Adjustable Range Reflective

Type		Multi-voltage
Type			With timer		With timer
Model No.		EQ-501	EQ-501T	EQ-502	EQ-502T
Regulatory compliance		・Low Voltage Directive ： EN IEC 60947-5-2 ・EMC Directive ： EN IEC 60947-5-2 ・RoHS Directive ・GB/T 14048.10
Certification		-
Adjustable range (Note 2,3)		0.2 to 2.5 m 0.656 to 8.202 ft		0.2 to 1.0 m 0.656 to 3.281 ft
Sensing range (at max. setting distance) (Note 3)		0.1 to 2.5 m 0.328 to 8.202 ft		0.1 to 1.0 m 0.328 to 3.281 ft
Hysteresis (Note 3)		10 % or less of operation distance
Repeatability (perpendicular to sensing axis)		10 mm (Note 3)		4 mm (Note 3)
Supply voltage		24-240 V AC ±10 % or 12 to 240 V DC ±10 % Ripple P-P 10 % or less
Power / Current consumption		AC: 4 VA or less DC: 3 W or less	AC: 5 VA or less DC: 4 W or less	AC: 4 VA or less DC: 3 W or less	AC: 5 VA or less DC: 4 W or less
Output		Relay contact 1a • Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load) • Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour) • Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour)
	Output operation	Switchable either Detection-ON or Detection-OFF
	Short-circuit protection	-
Response time		20 ms or less (For EQ-50□T depends on the setting timer period)
Operation indicator		Orange LED (lights up when the output is ON)
Stability indicator		Green LED (lights up under stable operating condition)
Distance adjuster		2-turn mechanical adjuster with indicator

Whatsapp

Convergent Reflective Photoelectric Sensor EX-40

Convergent Reflective Photoelectric Sensor EX-40

Type		Diffused beam type		Spot-beam type
Type			Long sensing range
Model No.		EX-42	EX-44	EX-43
Applicable regulations		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range		5 to 38 mm 0.197 to 1.496 in (Conv. point: 20 mm 0.787 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)	10 to 70 mm 0.394 to 2.756 in (Conv. point: 40 mm 1.575 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)	20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
Min. sensing object		ø0.2 mm ø0.008 in copper wire (Setting distance: 20 mm 0.787 in)	ø0.2 mm ø0.008 in copper wire (Setting distance: 40 mm 1.575 in)	ø0.03 mm ø0.001 in gold wire (Setting distance: 30 mm 1.181 in)
Hysteresis		15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)		10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
Repeatability (perpendicular to sensing axis)		0.1 mm 0.004 in or less (Setting distance: 20 mm 0.787 in)	0.2 mm 0.008 in or less (Setting distance: 40 mm 1.575 in)	0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in)
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		35 mA or less
Output		NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage (Note 2) : 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current)
	Utilization category	DC-12 or DC-13
	Output operation	Light-ON
	Short-circuit protection	Incorporated
Response time		0.5 ms or less
Operation indicator		Red LED (lights up when the output is ON)

Whatsapp

Threaded Miniature Photoelectric Sensor EX-30 Ver.2

Threaded Miniature Photoelectric Sensor EX-30 Ver.2

Type		Thru-beam			Diffuse reflective
Model No.				With operation mode switch
	NPN output	EX-31A	EX-31B	EX-33	EX-32A	EX-32B
	PNP output	EX-31A-PN	EX-31B-PN	EX-33-PN	EX-32A-PN	EX-32B-PN
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition certification [Excluding EX-33(-PN), 5 m cable length type]
Sensing range		500 mm 19.685 in		800 mm 31.496 in	50 mm 1.969 in (Note 2)
Sensing object		ø2 mm ø0.079 in or more opaque object (Completely beam interrupted objects)			Opaque, translucent or transparent object (Note 3)
Hysteresis		-			15 % or less of operation distance (Note 2)
Repeatability (perpendicular to sensing axis)		0.05 mm 0.002 in or less			0.5 mm 0.020 in or less
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Emitter: 10 mA or less, Receiver: 10 mA or less			13 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 50 mA source current) 1 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Output operation	Light-ON	Dark-ON	Switchable either Light-ON or Dark-ON	Light-ON	Dark-ON
	Short-circuit protection	Incorporated
Response time		0.5 ms or less
Operation indicator		Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)

Whatsapp

Ultra-compact Photoelectric Sensor EX-20 Ver.2

Ultra-compact Photoelectric Sensor EX-20 Ver.2

Type		Thru-beam		Retroreflective	Diffuse reflective
Type		Front sensing	Side sensing	Side sensing	Side sensing
Model No. (Note 2)	Light-ON	EX-21A (-PN)	EX-23 (-PN) (Note 3)	EX-29A (-PN)	EX-22A (-PN)
Model No. (Note 2)	Dark-ON	EX-21B (-PN)	EX-23 (-PN) (Note 3)	EX-29B (-PN)	EX-22B (-PN)
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition certification (Note 7)
Sensing range		1 m 3.281 ft	2 m 6.562 ft	30 to 200 mm 1.181 to 7.874 in (Note 4)	5 to 160 mm 0.197 to 6.299 in (Note 5) with white non-glossy paper (200 x 200 mm) (7.874 x 7.874 in)
Sensing object		Min. ø2.6 mm ø0.102 in opaque object (Setting distance between emitter and receiver: 1 m 3.281 ft)	Min. ø3 mm ø0.118 in opaque object (Setting distance between emitter and receiver: 2 m 6.562 ft)	ø15 mm ø0.591 in or more opaque or translucent object (Note 4, 6)	Opaque, translucent or transparent object (Note 6)
Hysteresis		-			15 % or less of operation distance [200 x 200 mm 7.874 x 7.874 in (with white non-glossy paper)]
Repeatability (perpendicular to sensing axis)		0.05 mm 0.002 in or less		0.5 mm 0.020 in or less	0.3 mm 0.012 in or less
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Emitter: 10 mA or less, Receiver: 10 mA or less		13 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 50 mA source current) 1 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Short-circuit protection	Incorporated
Response time		0.5 ms or less
Operation indicator		Orange LED (lights up when the output is ON) (thru-beam type: located on the receiver)

Whatsapp

Ultra-slim Photoelectric Sensor EX-10 Ver.2

Ultra-slim Photoelectric Sensor EX-10 Ver.2

Type		Thru-beam
Type		Front sensing	Side sensing	Front sensing	Side sensing	Front sensing	Side sensing
Model No. (Note 2)	Light-ON	EX-11A (-PN)	EX-11EA (-PN)	EX-13A (-PN)	EX-13EA (-PN)	EX-19A (-PN)	EX-19EA (-PN)
Model No. (Note 2)	Dark-ON	EX-11B (-PN)	EX-11EB (-PN)	EX-13B (-PN)	EX-13EB (-PN)	EX-19B (-PN)	EX-19EB (-PN)
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note 3), UL Recognition certification (Note 4)
Sensing range		150 mm 5.906 in		500 mm 19.685 in		1 m 3.281 ft
Min. sensing object		ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in)		ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)		ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 1 m 3.281 ft)
Hysteresis		-
Repeatability (perpendicular to sensing axis)		0.05 mm 0.002 in or less
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Emitter: 10 mA or less, Receiver: 10 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 50 mA source current) 1 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Short-circuit protection	Incorporated
Response time		0.5 ms or less
Operation indicator		Orange LED (lights up when the output is ON)

Whatsapp

Adjustable range reflective

Adjustable range reflective

Type		Adjustable range reflective
Model No.	NPN output	CX-443
Model No.	PNP output	CX-443-P
CE marking directive compliance		EMC Directive, RoHS Directive
Adjustable range (Note 2)		20 to 50 mm 0.787 to 1.969 in
Sensing range (with white non-glossy paper)		2 to 50 mm 0.079 to 1.969 in
Hysteresis		2 % or less of operation distance (with white non-glossy paper)
Repeatability		Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		20 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 100 mA source current) 1 V or less (at 16 mA source current)
	Output operation	Switchable either Detection-ON or Detection-OFF
	Short-circuit protection	Incorporated
Response time		1 ms or less

Whatsapp

Retroreflective

Retroreflective

Type		Retroreflective
		With polarizing filters
		Light-ON	Dark-ON
Model No.	NPN output	CX-491A-C05-Y	CX-491B-C05-Y
Model No.	PNP output	CX-491A-P-C05-Y	CX-491B-P-C05-Y
CE marking directive compliance		EMC Directive, RoHS Directive
Sensing range		3 m 9.843 ft (Note 2)
Sensing object		ø50 mm ø1.969 in or more transparent, translucent or opaque object (Note 2, 4)
Hysteresis		-
Repeatability (perpendicular to sensing axis)		0.5 mm 0.020 in or less
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		13 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 100 mA source current) 1 V or less (at 16 mA source current)
	Short-circuit protection	Incorporated
Response time		1 ms or less

Whatsapp

Thru-beam

Thru-beam

Type		Thru-beam
		Small spot		Long sensing range
		Light-ON	Dark-ON	Light-ON	Dark-ON
Model No.	NPN output	CX-411A-C05	CX-411B-C05	CX-412A-C05	CX-412B-C05
Model No.	PNP output	CX-411A-P-C05	CX-411B-P-C05	CX-412A-P-C05	CX-412B-P-C05
CE marking directive compliance		EMC Directive, RoHS Directive
Sensing range		10 m 32.808 ft		15 m 49.213 ft
Sensing object		ø12 mm ø0.472 in or more opaque object (Note 3)
Hysteresis		-
Repeatability (perpendicular to sensing axis)		0.5 mm 0.020 in or less
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		Emitter: 15 mA or less Receiver: 10 mA or less		Emitter: 20 mA or less Receiver: 10 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 100 mA source current) 1 V or less (at 16 mA source current)
	Short-circuit protection	Incorporated
Response time		1 ms or less

Whatsapp

Adjustable range reflective

Adjustable range reflective

Type		Adjustable range reflective
Type		Small spot
Model No.	NPN output	CX-441	CX-444	CX-442
Model No.	PNP output	CX-441-P	CX-444-P	CX-442-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Adjustable range (Note 2)		20 to 50 mm 0.787 to 1.969 in	20 to 100 mm 0.787 to 3.937 in	40 to 300 mm 1.575 to 11.811 in
Sensing range (with white non-glossy paper)		2 to 50 mm 0.079 to 1.969 in	2 to 50 mm 0.079 to 1.969 in (Distance setting: 50 mm 1.969 in) 15 to 100 mm 0.591 to 3.937 in (Distance setting: 100 mm 3.937 in)	20 to 300 mm 0.787 to 11.811 in
Hysteresis		2 % or less of operation distance (with white non-glossy paper)		5 % or less of operation distance (with white non-glossy paper)
Repeatability		Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		20 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 100 mA source current) 1 V or less (at 16 mA source current)
	Output operation	Switchable either Detection-ON or Detection-OFF
	Short-circuit protection	Incorporated
Response time		1 ms or less

Whatsapp

Diffuse reflective

Diffuse reflective

Type		Diffuse reflective
Type					Narrow-view
Model No.	NPN output	CX-424	CX-421	CX-422	CX-423
Model No.	PNP output	CX-424-P	CX-421-P	CX-422-P	CX-423-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Sensing range		100 mm 3.937 in (Note 3)	300 mm 11.811 in (Note 3)	800 mm 31.496 in (Note 3)	70 to 300 mm 2.756 to 11.811 in (Note3)
Sensing object		Opaque, translucent or transparent object (Note 5)			Opaque, translucent or transparent object (Note 5) (Min. sensing object: ø0.5 mm ø0.020 in copper wire)
Hysteresis		15 % or less of operation distance (Note 3)
Repeatability (perpendicular to sensing axis)		1 mm 0.039 in or less			0.5 mm 0.020 in or less
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		13 mA or less		15 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 100 mA source current) 1 V or less (at 16 mA source current)
	Output operation	Switchable either Light-ON or Dark-ON
	Short-circuit protection	Incorporated
Response time		1 ms or less

Whatsapp

Retroreflective

Retroreflective

Type		Retroreflective
Type		With polarizing filters	Long sensing range	For transparent object sensing
Model No.	NPN output	CX-491	CX-493	CX-481	CX-483	CX-482
Model No.	PNP output	CX-491-P	CX-493-P	CX-481-P	CX-483-P	CX-482-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Sensing range		3 m 9.843 ft (Note 2)	5 m 16.404 ft (Note 2)	50 to 500 mm 1.969 to 19.685 in (Note 2)	50 to 1,000mm 1.969 to 39.37 in (Note 2)	0.1 to 2 m 0.328 to 6.562 ft (Note 2)
Sensing object		ø50 mm ø1.969 in or more opaque, translucent or specular object (Note 2, 5)	ø50 mm ø1.969 in or more opaque or translucent object (Note 2, 5)	ø50 mm ø1.969 in or more transparent, translucent or opaque object (Note 2, 5)
Hysteresis		-
Repeatability (perpendicular to sensing axis)		0.5 mm 0.020 in or less
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		13 mA or less	10 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 100 mA source current) 1 V or less (at 16 mA source current)
	Output operation	Switchable either Light-ON or Dark-ON
	Short-circuit protection	Incorporated
Response time		1 ms or less

Whatsapp

Compact Photoelectric Sensor

Compact Photoelectric Sensor

Type		Thru-beam
Type			Long sensing range
Model No.	NPN output	CX-411	CX-412	CX-413
Model No.	PNP output	CX-411-P	CX-412-P	CX-413-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Sensing range		10 m 32.808 ft	15 m 49.213 ft	30 m 98.425 ft
Sensing object		ø12 mm ø0.472 in or more opaque object (Note 4)
Hysteresis		-
Repeatability (perpendicular to sensing axis)		0.5 mm 0.020 in or less
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Emitter: 15 mA or less Receiver: 10 mA or less	Emitter: 20 mA or less Receiver: 10 mA or less	Emitter: 25 mA or less Receiver: 10 mA or less
Output		<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 100 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 100 mA source current) 1 V or less (at 16 mA source current)
	Output operation	Switchable either Light-ON or Dark-ON
	Short-circuit protection	Incorporated
Response time		1 ms or less		2 ms or less

Whatsapp

Ultra-minute Photoelectric Sensor EX-Z

Ultra-minute Photoelectric Sensor EX-Z

Type		Thru-beam
Type		Front sensing	Side sensing	Front sensing
Model No. (Note 2)	Light-ON	EX-Z11FA (-P)(-R)	EX-Z11A (-P)(-R)	EX-Z12FA (-P)(-R)
Model No. (Note 2)	Dark-ON	EX-Z11FB (-P)(-R)	EX-Z11B (-P)(-R)	EX-Z12FB (-P)(-R)
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Recognition
Sensing distance		50 mm 1.969 in		200 mm 7.874 in
Minimum sensing object		ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 50 mm 1.969 in)		ø0.5 mm ø0.02 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 200 mm 7.874 in)
Hysteresis		-
Repeatability (Perpendicular to sensing axis)		0.02 mm 0.001 in or less		0.03 mm 0.001 in or less
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		Emitter: 10 mA or less, Receiver: 10 mA or less
Output		<NPN output type> NPN open-collector transistor • Maximum sink current: 20 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.5 V or less (at 20 mA sink current) <PNP output type> PNP open-collector transistor • Maximum source current: 20 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 1.5 V or less (at 20 mA source current)
	Short-circuit protection	Incorporated
Response time		0.5 ms or less

Whatsapp

LX-101-Z

LX-101-Z

Item	Specifications
Product Number	LX-101-Z
Part Number	LX-101-Z
Products Name	Digital Mark Sensor
Product details	Plug-in connector type
Applicable regulations	EMC Directive, RoHS Directive
Sensing range	10 ± 3 mm 0.394 ± 0.118 in
Spot size	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
Supply voltage	12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Output 1(OUT)	NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current)
Output 1:Short-circuit protection	Incorporated
Output 1:Output operation	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)

Whatsapp

LX-101-P

LX-101-P

Item	Specifications
Product Number	LX-101-P
Part Number	LX-101-P
Products Name	Digital Mark Sensor
Product details	Cable type
Applicable regulations	EMC Directive, RoHS Directive
Sensing range	10 ± 3 mm 0.394 ± 0.118 in
Spot size	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
Supply voltage	12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Output 1(OUT)	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current)
Output 1:Short-circuit protection	Incorporated
Output 1:Output operation	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)

Whatsapp

LX-101

LX-101

Item	Specifications
Product Number	LX-101
Part Number	LX-101
Products Name	Digital Mark Sensor
Product details	Cable type
Applicable regulations	EMC Directive, RoHS Directive
Sensing range	10 ± 3 mm 0.394 ± 0.118 in
Spot size	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
Supply voltage	12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Output 1(OUT)	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current)

Whatsapp

CMOS Type Micro Laser Distance Sensor HG-C1000L

CMOS Type Micro Laser Distance Sensor HG-C1000L

Type		Measurement center 30 mm 1.181 in type	Measurement center 50 mm 1.969 in type	Measurement center 100 mm 3.937 in type	Measurement center 200 mm 7.874 in type	Measurement center 400 mm 15.748 in type
Model No.	Discrete wire	HG-C1030L3-P	HG-C1050L3-P	HG-C1100L3-P	HG-C1200L3-P	HG-C1400L3-P
Model No.	M12 connector	HG-C1030L3-P-J	HG-C1050L3-P-J	HG-C1100L3-P-J	HG-C1200L3-P-J	HG-C1400L3-P-J
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, UL/c-UL Recognition
Measurement center distance		30mm 1.181 in	50mm 1.969 in	100mm 3.937 in	200mm 7.874 in	400mm 15.748 in
Measurement range		±5mm 0.197 in	±15mm 0.591 in	±35mm 1.328 in	±80mm 3.150 in	±200mm 7.874 in
Repeatability		10μm 0.394 mil	30μm 1.181 mil	70μm 2.756 mil	200μm 7.874 mil	300μm 11.811 mil (Measuring distance 200～400mm 7.874 to 15.748 in) 800μm (Measuring distance 400～600mm 15.748 to 23.622 in)
Linearity		±0.1%F.S.			±0.2%F.S.	±0.2%F.S. (Measuring distance 200～400mm 7.874 to 15.748 in) ±0.3%F.S. (Measuring distance 400～600mm 15.748 to 23.622 in)
Temperature characteristic		0.03%F.S./℃
Light source		Red semiconductor laser Class 2 [IEC / EN/ JIS / GB / KS / FDA (Note 2)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil
Beam diameter (Note 3)		ø50μm 1.969 mil approx	ø70μm 2.756 mil approx	ø120μm 4.724 mil approx	ø300μm 11.811 mil approx	ø500μm 19.685 mil approx
Supply voltage		24V DC±10%　Ripple P-P10%
Power consumption		40 mA or less (at 24 V DC supply voltage)
Communication output (C/Q) (Note 4)	IO-Link communication	IO-Link Specification V1.1
	Baud rate	COM3(230.4kbps)
	Process data	4byte
	Minimum cycle time	1.0ms

Whatsapp

CMOS type Micro Laser Distance Sensor HG-C

CMOS type Micro Laser Distance Sensor HG-C

Type		Measurement center 30mm type	Measurement center 50mm type	Measurement center 100mm type
Model No.	NPN output	HG-C1030	HG-C1050	HG-C1100
Model No.	PNP output	HG-C1030-P	HG-C1050-P	HG-C1100-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, UL/c-UL Recognition
Measurement center distance		30 mm 1.181 in	50 mm 1.969 in	100 mm 3.937 in
Measurement range		±5 mm 0.197 in	±15 mm 0.591 in	±35 mm 1.328 in
Repeatability		10 μm 0.394 mil	30 μm 1.181 mil	70 μm 2.756 mil
Linearity		±0.1 % F.S.
Temperature characteristic		0.03 % F.S./℃
Light source		Red semiconductor laser Class 2 [IEC/EN/JIS/GB/KS/FDA (Note 2)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil
Beam diameter (Note 3)		ø50 μm 1.969 mil approx.	ø70 μm 2.756 mil approx.	ø120 μm 4.724 mil approx.
Supply voltage		12 to 24 V DC ±10 %, Ripple P-P 10 % or less
Power consumption		40 mA or less (at 24 V DC supply voltage), 65 mA or less (at 12 V DC supply voltage)
Control output		<NPN output type> NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (Between control output to 0V) • Residual voltage: 1.5 V or less (At 50 mA sink current) • Leakage current: 0.1 mA or less <PNP output type> PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (At 50 mA source current) • Leakage current: 0.1 mA or less

Whatsapp

Compact Laser Distance Sensor CX-F100

Compact Laser Distance Sensor CX-F100

Type		Cable type	M8 connection type (Note 5)
Model No.		CX-F121-W	CX-F121-Z-W
Applicable regulations		CE Marking (EMC Directive, RoHS Directive)
Setting range (Note 1)		100 to 3,000 mm
Sensing range (Note 1)		50 to 3,000 mm
Hysteresis (Note 1, 2)		Within 15% of the sensing distance (Sensing distance less than 900 mm) Within 8% of the sensing distance (Sensing distance 900 mm or more)
Black / white detection error		Within 5% of setting distance
Beam diameter (Typical value)		Approx. ø32 mm (Distance: 1,000 mm) Approx. ø105 mm (Distance: 3,000 mm)
Supply voltage		12 V DC to 24 V DC ±10%, Ripple P-P 10% or less
Current consumption		40 mA or less
Output		<NPN output> NPN transistor open-collector •Max sink current : 100 mA •Applied voltage : 30 V DC or less (between output - 0 V) •Residual voltage : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) <PNP output> PNP transistor open-collector •Max source current : 100 mA •Applied voltage : 30 V DC or less (between output - +V) •Residual voltage : 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
	Output operation	Switchable either Light-ON or Dark-ON
	Short-circuit protection	Incorporated (Auto reset)
Response time (Note 3)		Within 50 ms (Sensing distance less than 900 mm) Within 100 ms (Sensing distance 900 mm or more)
Emitting element		Class 1 laser (Note 4) Peak emission wavelength: 940 nm (Infrared invisible light)
L-ON / D-ON indicator		Green LED (ON during L-ON mode, OFF during D-ON mode)
BGS / FGS indicator		Green LED (ON during BGS mode, OFF during FGS mode)
Operation indicator		Orange LED (ON during output ON, OFF during output OFF)
Environmental resistance	Protection	IP67 (IEC)
	Ambient temperature	-25 to +55 ℃, Storage: -30 to +70 ℃ (No dew condensation or icing allowed)
	Ambient humidity	35 to 85% RH, Storage: 35 to 85% RH
	Ambient illuminance	Incandescent light: 2,000 ℓx or less at the light-receiving face
	Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
	Insulation resistance	20 MΩ or more with 250 V DC mega between all supply terminals connected together and enclosure
	Vibration resistance	10 to 500 Hz frequency, 1.5 mm double amplitude (maximum acceleration 100 m/s²), in X, Y and Z directions for two hours each (without power supply)
	Shock resistance	500 m/s² acceleration (approx. 50 G) in X, Y and Z directions three times each (without power supply)
Material		Enclosure: PBT, Lens: PMMA, Button: PC+TPU, M8 connector (CX-F121-Z-W only) : PBT
Cable		0.2 mm² 4-core cabtyre cable, length: 2 m	- (Note 5)
Cable extension		Extension up to total 100 m is possible with 0.3 mm², or more, cable
Weight		Net weight: Approx. 50 g, Gross weight: Approx. 60 g	Net weight: Approx. 7 g, Gross weight: Approx. 20 g

Whatsapp

CONVERGENT REFLECTIVE TYPE

CONVERGENT REFLECTIVE TYPE

Type		Convergent reflective
Type		Spot	Line spot
Model No.	NPN output	EX-L261	EX-L262
Model No.	PNP output	EX-L261-P	EX-L262-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, Chinese Standard GB 7247.1
Sensing range		20 to 50 mm 0.787 to 1.969 in (Convergent point: 22 mm 0.866 in) (Note 2)	20 to 70 mm 0.787 to 2.756 in (Convergent point: 22 mm 0.866 in) (Note 2)
Emission spot size (Typical)		ø1mm 0.039 in or less (at a sensing distance of 50 mm) (Note 3)	Approx. 5 × 1 mm 0.197 × 0.039 in (vertical × horizontal) (at a sensing distance of 50 mm)
Sensing object		Opaque, translucent or transparent object (Note 4)
Minimum sensing object (Typical) (Note 5)		Gold wire of ø0.01 mm ø0.0004 in	-
Hysteresis		20 % or less of operation distance
Repeatability		Perpendicular to sensing axis: 0.2 mm 0.0080 in or less
Repeatability (Typical) (perpendicular to sensing axis) (Note 5)		0.02 mm 0.0008 in or less (at 100 to 200 mm sensing distance)	-
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		15 mA or less

Whatsapp

REFLECTIVE TYPE

REFLECTIVE TYPE

Type		Retroreflective	Spot reflective
Type		Long sensing range	Minute object detection
Model No.	NPN output	EX-L291	EX-L221
Model No.	PNP output	EX-L291-P	EX-L221-P
Applicable regulations and certifications		CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, Chinese Standard GB 7247.1
Sensing range		4 m 13.123 ft (Note 2)	45 to 300 mm 1.772 to 11.811 in (Note 3)
Emission spot size (Typical)		Approx. 6 × 4 mm 0.236 × 0.157 in (vertical x horizontal) (at a sensing distance of 1 m) (Note 4)	ø1 mm ø0.039 in or less (at a sensing distance of 300 mm)
Sensing object		Opaque translucent object of ø25 mm ø0.984 in or more	Opaque, translucent or transparent object (Note 7)
Minimum sensing object (Typical) (Note 5)		-	Gold wire of ø0.01 mm ø0.0004 in
Hysteresis		20 % or less of operation distance
Repeatability		Perpendicular to sensing axis: 0.2 mm 0.0080 in or less
Repeatability (Typical) (perpendicular to sensing axis) (Note 5)		-	0.02 mm 0.0008 in or less (at 100 to 200 mm sensing distance)
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		15 mA or less

Whatsapp

Lihat Juga

MERCOTAC 830

MERCOTAC 830

PSENcode - non-contact, coded safety switches

PSENcode - non-contact, coded safety switches

E3AS-HL / F / L Series

E3AS-HL / F / L Series

Contactors, Overloads, and Breakers

Contactors, Overloads, and Breakers

High Current SMT Power Inductor

High Current SMT Power Inductor

Mitsubishi Power Supply Q61P

Mitsubishi Power Supply Q61P

GR18

GR18

MULTIFEEDER BTSR

MULTIFEEDER BTSR